Show simple item record

dc.contributor.authorKocman, Stanislav
dc.contributor.authorOrság, Petr
dc.contributor.authorPečínka, Pavel
dc.date.accessioned2018-11-06T13:02:50Z
dc.date.available2018-11-06T13:02:50Z
dc.date.issued2018
dc.identifier.citationAdvances in electrical and electronic engineering. 2018, vol. 16, no. 3, p. 288-296 : il.cs
dc.identifier.issn1336-1376
dc.identifier.issn1804-3119
dc.identifier.urihttp://hdl.handle.net/10084/132813
dc.description.abstractIn this paper, some results from a simulation of three-phase squirrel-cage induction motor using COMSOL Multiphysics software are shown for the selected motor operating conditions. The simulation has been carried out under the nominal operating condition at the nominal rotational speed, for the operation under no-load and for the operation under locked rotor. The waveforms of the stator current, the currents in two neighbouring rotor bars, the current in the rotor ring and the motor inner torque are presented for each tested condition. The simulated values of some motor parameters are compared to their values from the motor catalogue, the manufacturer’s measurement, or the measurement in our laboratory, respectively. The simulated values of the rotor bar current and the rotor ring current are compared to their values from the scientific literature. The parameters of the motor equivalent circuit are calculated by COMSOL and compared to the values calculated from the motor data plate and from the measured values.cs
dc.format.extent2123036 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoencs
dc.publisherVysoká škola báňská - Technická univerzita Ostravacs
dc.relation.ispartofseriesAdvances in electrical and electronic engineeringcs
dc.relation.urihttp://dx.doi.org/10.15598/aeee.v16i3.2824cs
dc.rights© Vysoká škola báňská - Technická univerzita Ostrava
dc.rightsAttribution-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nd/4.0/*
dc.subjectCOMSOLcs
dc.subjectinduction motorcs
dc.subjectoperating conditioncs
dc.subjectmotor parametercs
dc.subjectsimulationcs
dc.titleSimulation of selected induction motor operating conditions using COMSOL softwarecs
dc.typearticlecs
dc.identifier.doi10.15598/aeee.v16i3.2824
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs


Files in this item

This item appears in the following Collection(s)

Show simple item record

© Vysoká škola báňská - Technická univerzita Ostrava
Except where otherwise noted, this item's license is described as © Vysoká škola báňská - Technická univerzita Ostrava