Prohlížení Publikační činnost Katedry metalurgie a slévárentví / Publications of Department of Metallurgy and Foundry (618) dle autora "Gryc, Karel"
-
A study of the high-temperature interaction between synthetic slags and steel
Gryc, Karel; Stránský, Karel; Michalek, Karel; Winkler, Zdeněk; Morávka, Jan; Tkadlečková, Markéta; Socha, Ladislav; Bažan, Jiří; Dobrovská, Jana; Zlá, Simona (Materiali In Tehnologije. 2012, vol. 46, no. 4, s. 403-406.) -
Desulphurization of the high-alloy and middle-alloy steels under the conditions of an eaf by means of synthetic slag based on CaO-Al2O3
Michalek, Karel; Čamek, Libor; Gryc, Karel; Tkadlečková, Markéta; Huczala, Tomáš; Troszok, Vladimír (Materiali In Tehnologije. 2012, vol. 46, issue 3, p. 297-303.) -
Determination of solidus and liquidus temperatures for bearing steel by thermal analysis methods
Gryc, Karel; Strouhalová, Michaela; Smetana, Bedřich; Kawuloková, Monika; Zlá, Simona; Socha, Ladislav; Michalek, Karel; Tkadlečková, Markéta; Kalup, Aleš; Jonšta, Petr; Sušovský, Michal (Metalurgija. 2017, vol. 56, no. 3-4, p. 385-388.) -
Determination of solidus and liquidus temperatures for S34MnV steel grade by thermal analysis and calculations
Gryc, Karel; Smetana, Bedřich; Tkadlečková, Markéta; Žaludová, Monika; Michalek, Karel; Socha, Ladislav; Dobrovská, Jana; Janiszewski, Krystian; Machovčák, Pavel (Metalurgija. 2014, vol. 53, no. 3, p. 295-298.) -
Determination of the solidus and liquidus temperatures of the real-steel grades with dynamic thermal-analysis methods
Gryc, Karel; Smetana, Bedřich; Žaludová, Monika; Michalek, Karel; Klus, Petr; Tkadlečková, Markéta; Socha, Ladislav; Dobrovská, Jana; Machovčák, Pavel; Válek, Ladislav; Pachlopnik, Radim; Chmiel, Bohuslav (Materiali In Tehnologije. 2013, vol. 47, issue 5, s. 569-575p) -
Evaluation of fluxing agents effect on desulphurization in secondary metallurgy under plant conditions
Socha, Ladislav; Bažan, Jiří; Gryc, Karel; Machovčák, Pavel; Morávka, Jan; Styrnal, Petr (Metalurgija. 2013, vol. 52, no. 4, p. 485-488.) -
Evaluation of influence of briquetted synthetic slags on slag regime and process of steel desulphurization
Socha, Ladislav; Michalek, Karel; Bažan, Jiří; Gryc, Karel; Machovčák, Pavel; Opler, Aleš; Styrnal, Petr (Archives of Metallurgy and Materials. 2014, vol. 59, issue 2, p. 809-813.) -
Evaluation of steel desulphurization in the ladle during the utilization of briquetting fluxing agents for slags
Socha, Ladislav; Bažan, Jiří; Gryc, Karel; Morávka, Jan; Styrnal, Petr; Pilka, Václav; Piegza, Zbygněv; Michalek, Karel; Tkadlečková, Markéta (Materiali In Tehnologije. 2012, vol. 46, no. 6, s. 677-682.) -
Evaluation of the chemical composition and microcleanliness of the steel samples from the heavy forging ingot
Michalek, Karel; Tkadlečková, Markéta; Gryc, Karel; Machovčák, Pavel (Archives of Metallurgy and Materials. 2013, vol. 58, issue 4, p. 1161-1167.) -
Experimental verification of hematite ingot mould heat capacity and its direct utilisation in simulation of casting process
Smetana, Bedřich; Žaludová, Monika; Tkadlečková, Markéta; Dobrovská, Jana; Zlá, Simona; Gryc, Karel; Klus, Petr; Michalek, Karel; Machovčák, Pavel; Řeháčková, Lenka (Journal of Thermal Analysis and Calorimetry. 2013, vol. 112, issue 1, p. 473-480.) -
Influence of direct thermal analysis experimental conditions on determination of the high temperature phase transformation temperatures
Gryc, Karel; Strouhalová, Michaela; Smetana, Bedřich; Socha, Ladislav; Michalek, Karel (Archives of Metallurgy and Materials. 2015, vol. 60, issue 4, p. 2867-2871.) -
Influence of submerged entry nozzle on intermixed zone in round blooms with a diameter of 525 mm
Michalek, Karel; Gryc, Karel; Tkadlečková, Markéta; Morávka, Jan; Huczala, Tomáš; Bocek, David; Horáková, Dana (Archives of Metallurgy and Materials. 2013, vol. 58, issue 1, p. 187-191.) -
Mathematical identification of homogenisation processes in argon stirred ladle
Michalek, Karel; Morávka, Jan; Gryc, Karel (Metalurgija. 2009, g. 48, br. 4, s. 219-222.) -
Model study of tundish steel intermixing and operational verification
Michalek, Karel; Gryc, Karel; Tkadlečková, Markéta; Bocek, David (Archives of Metallurgy and Materials. 2012, vol. 57, no. 1, s. 291-296.) -
Numerical modelling of macrosegregation in heavy steel ingot
Tkadlečková, Markéta; Machovčák, Pavel; Gryc, Karel; Michalek, Karel; Socha, Ladislav; Klus, Petr (Archives of Metallurgy and Materials. 2013, vol. 58, issue 1, p. 171-177.) -
Optimisation of the slag mode in the ladle during the steel processing of secondary metallurgy
Socha, Ladislav; Bažan, Jiří; Gryc, Karel; Morávka, Jan; Styrnal, Petr; Pilka, Václav; Piegza, Zbygněv (Materiali In Tehnologije. 2013, vol. 47, issue 5, p. 673-678.) -
Physical and numerical modelling of a non-stationary steel flow through a subentry shroud with an inner metering nozzle
Michalek, Karel; Tkadlečková, Markéta; Gryc, Karel; Cupek, Jiří; Macura, Michal (Materiali In Tehnologije. 2013, vol. 47, issue 6, p. 807-814.) -
Physical modelling of bath homogenisation in argon stirred ladle
Michalek, Karel; Gryc, Karel; Morávka, Jan (Metalurgija. 2009, g. 48, br. 4, s. 215-218.) -
Physical modelling of tundish slag entrainment under various technological conditions
Michalek, Karel; Gryc, Karel; Socha, Ladislav; Tkadlečková, Markéta; Saternus, Mariola; Pieprzyca, Jacek; Merder, Tomasz; Pindor, Lukáš (Archives of Metallurgy and Materials. 2017, vol. 62, issue 3, p. 1467-1471.) -
Possibilities for desulphurization of an alloy steel in a VOD device while using chemical heating
Michalek, Karel; Čamek, Libor; Gryc, Karel; Huczala, Tomáš; Troszok, Vladimír (Materiali In Tehnologije. 2013, vol. 47, issue 1, p. 135-140.)