dc.contributor.advisor | Vožda, Michal | cs |
dc.contributor.author | Ligocki, Lukáš | cs |
dc.date.accessioned | 2014-08-05T10:12:26Z | |
dc.date.available | 2014-08-05T10:12:26Z | |
dc.date.issued | 2014 | cs |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/104050 | |
dc.description | Import 05/08/2014 | cs |
dc.description.abstract | Bioimpedance je elektrická vlastnost lidského těla, která je závislá na mnoha faktorech. Měření bioimpedance se využívá ke zjištění složení těla, například množství a hmotnosti tuku a svalů v těle, nebo množství vody v těle. V této práci je popsán návrh a realizace zařízení, které umožňuje měřit velikost a fázi bioimpedance na třech různých frekvencích, které jsou 15,625 kHz, 31,250 kHz a 62,500 kHz. Pro realizaci zařízení byl použit obvod AFE4300 od americké firmy Texas Instuments. Zařízení bylo testováno na modelu lidského těla a výsledky byly ověřeny výpočtem. Dále byl přístroj srovnán s komerčně dostupným zařízením. | cs |
dc.description.abstract | Bioimpedance is an electrical characteristic of the human body, which is dependent on many factors. Bioimpedance measurement is used to determine the composition of the body, such as the amount and weight of the fat and muscle in the body or body water. This paper describes the design and implementation of a device that allows you to measure the size and stage of bioimpedance at three different frequencies, which are 15.625 kHz, 31,250 kHz and 62,500 kHz. To realize the device was used circuit AFE4300 from the U.S. company Texas instuments. The device was tested on a human body model and the results were verified by calculation. Further, the device was compared with commercially available equipment. | en |
dc.format.extent | 4182955 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | cs |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | Bioimpedance | cs |
dc.subject | impedance | cs |
dc.subject | tkáň | cs |
dc.subject | tuková hmota | cs |
dc.subject | svalová hmota | cs |
dc.subject | tělesná voda | cs |
dc.subject | mikrokontroler | cs |
dc.subject | AFE4300 | cs |
dc.subject | firmware. | cs |
dc.subject | Bioimpedance | en |
dc.subject | impedance | en |
dc.subject | tissue | en |
dc.subject | fat mass | en |
dc.subject | muscle mass | en |
dc.subject | body water | en |
dc.subject | microcontroller | en |
dc.subject | AFE4300 | en |
dc.subject | firmware. | en |
dc.title | Zařízení pro měření bioimpedance s využitím obvodu AFE4300 | cs |
dc.title.alternative | Device for Measuring of Bioimpedance using Circuit AFE4300 | en |
dc.type | Bakalářská práce | cs |
dc.contributor.referee | Štohanzl, Milan | cs |
dc.date.accepted | 2014-06-03 | cs |
dc.thesis.degree-name | Bc. | cs |
dc.thesis.degree-level | Bakalářský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta elektrotechniky a informatiky | cs |
dc.description.department | 450 - Katedra kybernetiky a biomedicínského inženýrství | cs |
dc.thesis.degree-program | Elektrotechnika | cs |
dc.thesis.degree-branch | Biomedicínský technik | cs |
dc.description.result | výborně | cs |
dc.identifier.sender | S2724 | cs |
dc.identifier.thesis | LIG0010_FEI_B2649_3901R039_2014 | |
dc.rights.access | openAccess | |