dc.contributor.advisor | Boháčová, Jana | cs |
dc.contributor.author | Koňařík, Josef | cs |
dc.date.accessioned | 2014-08-05T10:40:52Z | |
dc.date.available | 2014-08-05T10:40:52Z | |
dc.date.issued | 2014 | cs |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/105515 | |
dc.description | Import 05/08/2014 | cs |
dc.description.abstract | Alkalicky aktivované systémy jsou anorganické hmoty vzniklé alkalickou aktivací a následnou polykondenzací. Vyznačují se zejména energetickým a ekologickým potenciálem. Cílem této práce je zkoumání vlivu na vybrané konečné vlastnosti alkalicky aktivovaných systémů na bázi vysokopecní granulované strusky při použití různých aktivátorů.
V experimentech byly u připravených receptur zjišťovány konzistence, počátky a konce doby tuhnutí nastávaly mezi 40-120 minutami, pevnosti v tahu a tlaku pohybující se mezi 40- 100 MPa, mrazuvzdornost a odolnost povrchu proti působení chemických rozmrazovacích látek byla potvrzena.
V závěrečné části práce byly připraveny ukázky možného uplatnění připravených kompozitů ve stavební praxi, přičemž se tato část výzkumu zaměřila na vzhled povrchu a pórovitost, zpracovatelnost směsi a podmínky odformování, možnosti přípravy ve výrobním procesu. Nejvhodnější pro tuto aplikaci je receptura s DESIL AL. | cs |
dc.description.abstract | Alkali-activated systems are inorganic materials formed by the alkaline activation and by the subsequent polycondensation. These materials are characterized by the energy and environmental potential. The objective of this work is to investigate the influence of the selected final properties of alkali-activated systems based on granulated blast furnace slag when using different activators.
In the experiments the prepared recipes were tested for consistency, the beginnings and ends of the time of solidification occurred between 40-120 minutes , strength and tensile strength in the range 40- 100 MPa, frost resistance and surface resistance to chemical de-icing substances was confirmed.
In the final part of the work samples were prepared for the possible application of composites in building practice, while this part of the research was focused on the appearance of the surface and porosity, workability and conditions for removal from the mold and the possibility of industrial production. Most suitable for this application is recipe with Desil AL. | en |
dc.format | 89 l. : il. + 1 CD-R | cs |
dc.format.extent | 13553809 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | cs |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | alkalicky aktivovaný | cs |
dc.subject | jemně mletá granulovaná vysokopecní struska | cs |
dc.subject | aktivátor | cs |
dc.subject | praktická aplikace | cs |
dc.subject | alkali-activated | en |
dc.subject | finely ground granulated blast furnace slag | en |
dc.subject | activator | en |
dc.subject | practical application | en |
dc.title | Vliv aktivátoru na základní vlastnosti alkalicky aktivovaných systémů | cs |
dc.title.alternative | The influence of activator on the basic properties of alkali-activated systems | en |
dc.type | Bakalářská práce | cs |
dc.contributor.referee | Mec, Pavel | cs |
dc.date.accepted | 2014-05-27 | cs |
dc.thesis.degree-name | Bc. | cs |
dc.thesis.degree-level | Bakalářský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta stavební | cs |
dc.description.category | Prezenční | cs |
dc.description.department | 223 - Katedra stavebních hmot a diagnostiky staveb | cs |
dc.thesis.degree-program | Stavební inženýrství | cs |
dc.thesis.degree-branch | Stavební hmoty a diagnostika staveb | cs |
dc.description.result | výborně | cs |
dc.identifier.sender | S2712 | cs |
dc.identifier.thesis | KON0058_FAST_B3607_3647R019_2014 | |
dc.rights.access | openAccess | |