Zobrazit minimální záznam

dc.contributor.advisorKhestl, Filipcs
dc.contributor.authorŠulková, Veronikacs
dc.date.accessioned2015-02-26T06:29:41Z
dc.date.available2015-02-26T06:29:41Z
dc.date.issued2014cs
dc.identifier.otherOSD002cs
dc.identifier.urihttp://hdl.handle.net/10084/106527
dc.descriptionImport 26/02/2015cs
dc.description.abstractPráce se zabývá možnostmi stavebního využití skelného nápeku vznikajícího při spalování biomasy. Jedná se o odpadní surovinu skelného charakteru, která může obsahovat popel a další znečišťující látky. Tento odpad bývá značně odlišný dle použitého druhu biomasy, zeminy, teploty a doby spalování. Struktura bývá převážně porézní a sklovitá. Stavební materiály, ve kterých lze uplatnit a vhodně využít vlastnosti tohoto nápeku jsou cementové či alkalicky aktivované kompozity, ve kterých může figurovat vzhledem ke své podstatě jako lehké plnivo případně i jako pojivo. Při využití skelného nápeku jako lehkého plniva budou zkoumány jeho fyzikální a mechanické vlastnosti. Na základě vhodnosti skelného nápeku jako pojiva budou zkoumány jeho fyzikální a mechanické vlastnosti na jemně mletém nápeku, u kterého byly kromě jiného zjišťovány pucolánové vlastnosti, tedy vhodnost využití tohoto materiálu jako částečné náhrady pojiva, například cementu.cs
dc.description.abstractThe work deals with possibilities using of glass slag produced during the combustion of biomass in building industry. It’s a waste product with glass characteristic, which may also contain ash and other pollutants. This waste is significantly different according to the used types of biomass, soil, temperature and time of combustion. Structure of this material is mostly porous and glassy. Building materials, in which you can apply and use a good properties of this slag, are cementitious or alkali-activated composites. Slag, due of the nature, can be used as a lightweight filler or binder. When using glass slag as lightweight filler its physical and mechanical properties will be investigated. Basic characteristics were examined on the fine mill slag at which they were found out, among other, pozzolanic properties, thus the suitability of using this material as a partial substitute binders, such as cement. Next we research if the glass slag is possible for usage as a light filling for concrete. Then we will test physical and mechanical properties and if this waste material is even fit for construction industry.en
dc.format138 l. : il. + 1 CD-Rcs
dc.format.extent11282275 bytescs
dc.format.mimetypeimage/pdfcs
dc.language.isocscs
dc.publisherVysoká škola báňská - Technická univerzita Ostravacs
dc.subjectbeton, skelný nápek, cement, kamenivo, geopolymer, odpadní suroviny, struska, popílekcs
dc.subjectconcrete, glass slag, cement, aggregate, geopolymer, waste materials, slag, ashen
dc.titleVyužití skelného nápeku ze spalování biomasycs
dc.title.alternativeUse of slag from biomass heating plantsen
dc.typeDiplomová prácecs
dc.contributor.refereeDufka, Amoscs
dc.date.accepted2015-01-14cs
dc.thesis.degree-nameIng.cs
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská - Technická univerzita Ostrava. Fakulta stavebnícs
dc.description.categoryPrezenčnícs
dc.description.department223 - Katedra stavebních hmot a diagnostiky stavebcs
dc.thesis.degree-programStavební inženýrstvícs
dc.thesis.degree-branchStavební hmoty a diagnostika stavebcs
dc.description.resultvelmi dobřecs
dc.identifier.senderS2712cs
dc.identifier.thesisSUL118_FAST_N3607_3607T021_2014
dc.rights.accessopenAccess


Soubory tohoto záznamu

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam