| dc.contributor.advisor | Havlík, Jiří | cs |
| dc.contributor.author | Kramoliš, Petr | cs |
| dc.date.accessioned | 2015-07-22T09:21:43Z | |
| dc.date.available | 2015-07-22T09:21:43Z | |
| dc.date.issued | 2015 | cs |
| dc.identifier.other | OSD002 | cs |
| dc.identifier.uri | http://hdl.handle.net/10084/109400 | |
| dc.description | Import 23/07/2015 | cs |
| dc.description.abstract | Diplomová práce se zabývá návrhem dráhy opony divadla. V úvodu diplomové práce je vypracovaná rešerše o dostupných drahách a podrobně popsána funkce drah. Na základě nejpoužívanějších druhů kolejnic je navrženo vlastní řešení dvou typů, s vnitřním, tak i s vnějším pojezdem. Navržená dráha opony divadla je zkonstruována, dále je provedena nezbytná pevnostní kontrola a navržen pohonný systém. V příloze diplomové práce je zdokumentován výkres sestavy dráhy opony divadla a výrobní výkres hnací kladky. | cs |
| dc.description.abstract | The master thesis is dealing with design of a theatre curtain travel. Introduction is focused on literature review of currently available theatre curtain travelers and their detailed function. Based on the most commonly used types of carriers two basic types were designed with both inner and outer travel. The designed tracks of theatre curtain were rigorously constructed where necessary stress analyses were made, and also appropriate propulsion system was designed. Technical drawings of both traveler curtain tracks and drive pulley were attached to the thesis. | en |
| dc.format.extent | 4350374 bytes | cs |
| dc.format.mimetype | application/pdf | cs |
| dc.language.iso | cs | cs |
| dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
| dc.subject | Dráha | cs |
| dc.subject | Opona | cs |
| dc.subject | Divadlo | cs |
| dc.subject | Track | en |
| dc.subject | Curtain | en |
| dc.subject | Theatre | en |
| dc.title | Dráha opony divadla | cs |
| dc.title.alternative | Theatre Curtain Travel | en |
| dc.type | Diplomová práce | cs |
| dc.contributor.referee | Němček, Miloš | cs |
| dc.date.accepted | 2015-06-11 | cs |
| dc.thesis.degree-name | Ing. | cs |
| dc.thesis.degree-level | Magisterský studijní program | cs |
| dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta strojní | cs |
| dc.description.department | 347 - Katedra částí a mechanismů strojů | cs |
| dc.thesis.degree-program | Strojní inženýrství | cs |
| dc.thesis.degree-branch | Konstrukční a procesní inženýrství | cs |
| dc.description.result | výborně | cs |
| dc.identifier.sender | S2723 | cs |
| dc.identifier.thesis | KRA0129_FS_N2301_3909T001_40_2015 | |
| dc.rights.access | openAccess | |