Show simple item record

dc.contributor.authorDurna, Antonín
dc.contributor.authorFries, Jiří
dc.contributor.authorHrabovský, Leopold
dc.contributor.authorSlíva, Aleš
dc.contributor.authorŽarnovský, Jozef
dc.date.accessioned2020-04-20T09:22:54Z
dc.date.available2020-04-20T09:22:54Z
dc.date.issued2020
dc.identifier.citationManagement Systems in Production Engineering. 2020, vol. 28, issue 1, p. 47-52.cs
dc.identifier.issn2299-0461
dc.identifier.issn2450-5781
dc.identifier.urihttp://hdl.handle.net/10084/139426
dc.description.abstractThis article deals with the adjustment of a 3D printer for laser engraving and material cutting. The print head can be fitted with a solid laser diode module, which achieves a compact size while retaining its useful power. Two paths lead to the use of such a concept. It is possible to equip the existing print head with a module, which also brings a number of disadvantages such as, for example, the reduction of the printing space or the need for a suitable mounting design. A more elegant solution is to consider this in the design of a 3D printer and design a system to exchange the print heads for 3D printing and laser engraving. Such a solution allows full utilization of the workspace and simple installation of the effector for the required type of work. According to the installed power of the laser diode, it is possible not only to engrave but also cut material such as thin wood, veneer or acrylic glass. The use of such a machine is not only for graphic elements but for the creation of various stencils, boxes or simple models, which can be made up of plastic-burning pieces. The laser module is controlled by a driver, which is designed for the device. This is connected to a 3D printer control board. It is, therefore, necessary for the control board to have at least two pins, which can be controlled after adjusting the control firmware. Most laser modules are normally equipped with an adjustable lens, which is used to concentrate the focus of a laser for the given distance against the worktop. Thus, the modified 3D printer can perform its function as a multi-purpose CNC machine, while a basic platform similar for both devices is used.cs
dc.language.isoencs
dc.publisherDe Gruytercs
dc.relation.ispartofseriesManagement Systems in Production Engineeringcs
dc.relation.urihttp://doi.org/10.2478/mspe-2020-0008cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/cs
dc.subject3D printercs
dc.subjectCNC machinecs
dc.subjectengravingcs
dc.subjectlasercs
dc.titleResearch and development of laser engraving and material cutting machine from 3D printercs
dc.typearticlecs
dc.identifier.doi10.2478/mspe-2020-0008
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume28cs
dc.description.issue1cs
dc.description.lastpage52cs
dc.description.firstpage47cs
dc.identifier.wos000520868000008


Files in this item

This item appears in the following Collection(s)

Show simple item record

http://creativecommons.org/licenses/by-nc-nd/4.0/
Except where otherwise noted, this item's license is described as http://creativecommons.org/licenses/by-nc-nd/4.0/