Show simple item record

dc.contributor.advisorHalama, Radim
dc.contributor.authorRajkumar Arokiaraj, James Akshay Nicholas
dc.date.accessioned2020-10-02T09:28:35Z
dc.date.available2020-10-02T09:28:35Z
dc.date.issued2020
dc.identifier.otherOSD002
dc.identifier.urihttp://hdl.handle.net/10084/142130
dc.description.abstractRajkumar Arokiaraj James Akshay Nicholas, Investigation of stress-strain behaviour in ONYX material and its modelling. Ostrava: VŠB Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Applied Mechanics, 2020, (57) p. Supervisor: prof. Ing. Radim Halama, Ph.D. The master thesis is truly based on the experimental and numerical study of specimens of different designs manufactured by 3D printing from Nylon strengthened by short carbon fibres, so called ONYX. The Finite Element Analyses were conducted for all mechanical tests performed. The viscoplastic model of Perzyna was calibrated to describe the stress/strain behaviour of ONYX correctly. The thesis deals with strain rate effect of ONYX material at different strain rates and creep test along with relaxation of the ONYX material investigated using Digital Image Correlation. All mechanical tests were carried out under room temperature. The calibrated material model can serve other researchers to describe a complex stress-strain behaviour of ONYX.en
dc.description.abstractRajkumar Arokiaraj James Akshay Nicholas, Výzkum napěťově-deformačního chování Onyxu a jeho popis. Ostrava: VŠB-Technická univerzita Ostrava, Fakulta strojní, Katedra aplikované mechaniky, 2020, (57) s. Vedoucí: prof. Ing. Radim Halama, Ph.D. Diplomová práce je založena na experimentálním a numerickém výzkumu vzorků různého designu vyrobených 3D tiskem z nylonu s krátkými uhlíkovými vlákny, tzv. ONYXu. Pro všechny provedené mechanické zkoušky byly provedeny analýzy konečných prvků. Viskoplastický model Perzyny byl kalibrován tak, aby správně popsal napěťově-deformační chování ONYXu. Diplomová práce se zabývá vlivem rychlosti zatěžování materiálu ONYX pro různé rychlosti deformace a creepovou zkouškou spolu s relaxací materiálu ONYX zkoumanou pomocí digitální korelace obrazu. Všechny mechanické zkoušky byly provedeny při pokojové teplotě. Kalibrovaný materiálový model může sloužit ostatním výzkumníkům k popisu komplexního chování ONYXu.cs
dc.format.extent4918909 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.publisherVysoká škola báňská – Technická univerzita Ostravacs
dc.subjectviscoplasticityen
dc.subjectcompositeen
dc.subjectonyxen
dc.subjectcreepen
dc.subjectrelaxationen
dc.subjectFEMen
dc.subjectviscoplasticitacs
dc.subjectkompozitcs
dc.subjectonyxcs
dc.subjecttečenícs
dc.subjectrelaxacecs
dc.subjectMKPcs
dc.titleInvestigation of Stress-Strain Behaviour of Onyx and its Descriptionen
dc.title.alternativeVýzkum napěťově-deformačního chování Onyxu a jeho popiscs
dc.typeDiplomová prácecs
dc.contributor.refereePavlíček, Pavel
dc.date.accepted2020-08-18
dc.thesis.degree-nameIng.
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská – Technická univerzita Ostrava. Fakulta strojnícs
dc.description.department330 - Katedra aplikované mechanikycs
dc.thesis.degree-programStrojní inženýrstvícs
dc.thesis.degree-branchAplikovaná mechanikacs
dc.description.resultvelmi dobřecs
dc.identifier.senderS2723
dc.identifier.thesisRAJ0057_FS_N2301_3901T003_2020
dc.rights.accessopenAccess


Files in this item

This item appears in the following Collection(s)

Show simple item record