Zobrazit minimální záznam

dc.contributor.advisorBurda, Jiří
dc.contributor.authorLasota, Lukáš
dc.date.accessioned2021-07-15T09:32:56Z
dc.date.available2021-07-15T09:32:56Z
dc.date.issued2021
dc.identifier.otherOSD002
dc.identifier.urihttp://hdl.handle.net/10084/144322
dc.description.abstractPrvní část práce obsahuje kapitoly týkající se problematiky redukce emisí NOx. Jsou zde popsány základní vlastnosti těchto látek, mechanismy jejich vzniku, legislativní souvislosti, přehled a popis možností jejich snižování. Ve druhé části je prezentován experiment, kdy byl ověřen vliv aditiv ve formě sloučenin železa na redukci NOx. Je zde popsáno experimentální zařízení, metodika, výpočty a podmínky při měření. Výsledky jsou graficky interpretovány, srovnány a diskutovány.cs
dc.description.abstractThe first part of the thesis contains chapters on the issue of reducing NOx emissions. It describes the basic properties of these substances, the mechanisms of their formation, legislative context, overview and description of the possibilities of their reduction. The second part presents an experiment where the effect of additives in the form of iron compounds on NOx reduction was verified. Experimental equipment, methodology, calculations and measurement conditions are described here. The results are graphically interpreted, compared and discussed.en
dc.format.extent2928779 bytes
dc.format.mimetypeapplication/pdf
dc.language.isocs
dc.publisherVysoká škola báňská – Technická univerzita Ostravacs
dc.subjectNOx, deNOx, SCR, SNCR, spalování odpadu na roštu, spalování zemního plynu, průmyslové hořákycs
dc.subjectNOx, deNOx, SCR, SNCR, waste incineration on grate, natural gas combustion, industrial burnersen
dc.titleSnižování emisí oxidů dusíku ve spalinách ze spalování odpadůcs
dc.title.alternativeReduction of nitrogen oxides emissions in exhaust gases from waste incinerationen
dc.typeDiplomová prácecs
dc.contributor.refereeVelička, Marek
dc.date.accepted2021-06-01
dc.thesis.degree-nameIng.
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská – Technická univerzita Ostrava. Fakulta materiálově-technologickács
dc.description.department635 - Katedra tepelné technikycs
dc.contributor.consultantVlček, Jozef
dc.thesis.degree-programMetalurgické inženýrstvícs
dc.thesis.degree-branchTepelná technika a keramické materiálycs
dc.description.resultvýborněcs
dc.identifier.senderS2736
dc.identifier.thesisLAS0047_FMT_N2109_2109T039_2021
dc.rights.accessopenAccess


Soubory tohoto záznamu

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam