dc.contributor.advisor | Horák, Jiří | |
dc.contributor.author | Kaszová, Tereza | |
dc.date.accessioned | 2021-07-15T09:34:44Z | |
dc.date.available | 2021-07-15T09:34:44Z | |
dc.date.issued | 2021 | |
dc.identifier.other | OSD002 | |
dc.identifier.uri | http://hdl.handle.net/10084/144581 | |
dc.description.abstract | Diplomová práce se zabývá návrhem inteligentního hybridního tepelného zdroje (IHTZ) o výkonu 25 kW. IHTZ je složen ze dvou částí, tzn. kotlové části spalující dřevěné pelety a tepelného čerpadla vzduch/voda. Úvodní část práce obsahuje především popis dostupných trendů ve vytápění domácností a následné zhodnocení výhod a nevýhod použití tepelných čerpadel a kotlů na pevná paliva při vytápění domácností. Dále je proveden celkový popis IHTZ a specifikace technických požadavků na jeho dvě části. Praktická část je zaměřena na analýzu ekonomiky provozu a návrh optimálního provozního režimu inteligentního hybridního tepelného zdroje. Kompletní praktická část je zpracována v elektronické příloze diplomové práce. Závěr práce je doplněn o výstupy experimentálního ověření provozu IHTZ. | cs |
dc.description.abstract | This master thesis deals with designing a smart hybrid heat source (SHHS) with an output 25 kW. SHHS consists of two parts that are a boiler part that burns wooden pallets and an air/water heat pump. The introductory part of the thesis contains mainly a description of available trends in household heating and subsequent evaluation of the advantages and disadvantages of using heat pumps and boilers for solid fuels. Furthermore, a general description of SHHS and specifications of technical requirements for its two parts are tuned. The practical part of the thesis focuses on the analysis of the economics of operation and the design of the optimal operating mode of an intelligent hybrid heat source. The full practical part is compiled in the electronic appendix of the diploma thesis. The conclusion of the paper is supplemented by the outputs of experimental verification of SHHS operation. | en |
dc.format.extent | 4735483 bytes | |
dc.format.mimetype | application/pdf | |
dc.language.iso | cs | |
dc.publisher | Vysoká škola báňská – Technická univerzita Ostrava | cs |
dc.subject | inteligentní hybridní tepelný zdroj, tepelné čerpadlo, kotel na biomasu | cs |
dc.subject | smart hybrid heat source, heat pump, biomass boiler | en |
dc.title | Inteligentní hybridní tepelný zdroj o výkonu 25 kW | cs |
dc.title.alternative | Smart Hybrid Heat Source with Output 25 kW | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Tomčala, Jiří | |
dc.date.accepted | 2021-06-08 | |
dc.thesis.degree-name | Ing. | |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská – Technická univerzita Ostrava. Fakulta strojní | cs |
dc.description.department | 361 - Katedra energetiky | cs |
dc.thesis.degree-program | Energetické stroje a zařízení | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2723 | |
dc.identifier.thesis | KAS0176_FS_N0713A070002_2021 | |
dc.rights.access | openAccess | |