Show simple item record

dc.contributor.advisorMedvec, Zdeněk
dc.contributor.authorTrčka, Karel
dc.date.accessioned2022-09-01T07:20:41Z
dc.date.available2022-09-01T07:20:41Z
dc.date.issued2022
dc.identifier.otherOSD002
dc.identifier.urihttp://hdl.handle.net/10084/147364
dc.description.abstractObsahem diplomové práce je návrh a nastavení elektrických ochran v rozvodně Červenka 110/22 kV. První část práce je teoretická, druhá část je praktická. V teoretické části je zahrnut teoretický rozbor elektrických ochran. Zde je především vysvětlena funkce a význam ochran, její základní členy a rozdělení ochran s důrazem na nadproudovou ochranu použitou v řešené rozvodně. Dále teoretická část řeší teoretický rozbor výpočtu zkratových proudů, popis rozvodny a popis nové použité ochrany pro její chránění. V našem případě je použita ochrana SIPROTEC 7SJ85, která nahradí staré elektromechanické a digitální ochrany. V praktické části je nejprve uveden výpočet zkratových poměrů na jednotlivých vývodech 22 kV z rozvodny. Následuje samotný návrh nastavení ochran v rozvodně Červenka 110/22 kV. Poslední bodem praktické části je kontrola selektivity ochran vůči spínací stanici Uničov a náhradnímu napájení rozvodny Šternberk.cs
dc.description.abstractThe diploma thesis deals with the design and settings of electrical protection in the substation Červenka 110/22 kV. The first part of the thesis is theoretical, the second part is practical. The theoretical part includes theoretical analysis of electrical protection. In this part the function and importance of the protection, its basic members and the division of the protection with emphasis on the overcurrent protection used in the substation is explained. Additionally, the theoretical part deals with the theoretical analysis of the calculation of short-circuit currents, description of the substation and description of the new protection used for its protection. In our case, SIPROTEC 7SJ85 protection is used to replace the old electromechanical and digital protection. First in the practical part there is presented the calculation of short-circuit ratios on individual pins 22 kV of the substation. Subsequently it deals with the actual design of the protection settings in the Červenka 110/22 kV substation. The last point of the practical part is the check of the selectivity of the protections towards the Uničov switching station and the substation Šternberk.en
dc.format.extent3535149 bytes
dc.format.mimetypeapplication/pdf
dc.language.isocs
dc.publisherVysoká škola báňská – Technická univerzita Ostravacs
dc.subjectElektrická rozvodnacs
dc.subjectnávrhcs
dc.subjectnastavenícs
dc.subjectelektrická ochranacs
dc.subjectelektrické vedenícs
dc.subjectzkratcs
dc.subjectvýpočet zkratových proudůcs
dc.subjectselektivitacs
dc.subjectnadproudová ochranacs
dc.subjectElectrical substationen
dc.subjectdesignen
dc.subjectsettingsen
dc.subjectelectrical protectionen
dc.subjectpowerlineen
dc.subjectshort-circuiten
dc.subjectshort-circuit current calculationen
dc.subjectselectivityen
dc.subjectovercurrent protectionen
dc.titleNávrh a nastavení elektrických ochran pro rozvodnu Červenkacs
dc.title.alternativeDesign and setting of electrical protections for the Červenka substationen
dc.typeDiplomová prácecs
dc.contributor.refereeBlokša, Milan
dc.date.accepted2022-05-31
dc.thesis.degree-nameIng.
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská – Technická univerzita Ostrava. Fakulta elektrotechniky a informatikycs
dc.description.department410 - Katedra elektroenergetikycs
dc.thesis.degree-programElektroenergetikacs
dc.description.resultvýborněcs
dc.identifier.senderS2724
dc.identifier.thesisTRC0035_FEI_N0713A060003_2022
dc.rights.accessopenAccess


Files in this item

This item appears in the following Collection(s)

Show simple item record