dc.contributor.advisor | Jankůj, Vojtěch | |
dc.contributor.author | Stolařová, Nikola | |
dc.date.accessioned | 2023-06-23T08:43:22Z | |
dc.date.available | 2023-06-23T08:43:22Z | |
dc.date.issued | 2023 | |
dc.identifier.other | OSD002 | |
dc.identifier.uri | http://hdl.handle.net/10084/149982 | |
dc.description.abstract | Diplomová práce se zabývá vlivem iniciačního zdroje na výbuchové parametry hořlavých plynů. V teoretické části této práce je nejprve proveden popis řešených hořlavých plynů, mezi které patří vodík a metan, obecný popis výbuchu, výbuchových parametrů a následně i faktorů, které tyto parametry ovlivňují.
Praktická část práce obsahuje popis výbuchového autoklávu VA 20 l, na kterém probíhalo měření, popis použitého alternativního zdroje iniciace a výsledky z provedeného experimentálního měření. V závěru jsou naměřené výsledky diskutovány a porovnány s již dříve provedenými studiemi. | cs |
dc.description.abstract | The thesis deals with the influence of the initiating source on the explosion parameters of flammable gases. In the theoretical part of this thesis, firstly a description of the flammable gases gets addressed, including hydrogen and methane, a general description of the explosion, the explosion parameters and then the factors that affect these parameters are presented.
The practical part of the thesis contains a description of the explosion autoclave VA 20 l on which the measurements were carried out, a description of the used alternative source of initiation and the results of the performed experimental measurements. In the conclusion, the measured results are discussed and compared with previously carried out studies. | en |
dc.format.extent | 3322336 bytes | |
dc.format.mimetype | application/pdf | |
dc.language.iso | cs | |
dc.publisher | Vysoká škola báňská – Technická univerzita Ostrava | cs |
dc.subject | hořlavé plyny | cs |
dc.subject | výbuchové parametry | cs |
dc.subject | iniciační zdroj | cs |
dc.subject | výbuchový autokláv | cs |
dc.subject | flammable gases | en |
dc.subject | explosion parameters | en |
dc.subject | initiating source | en |
dc.subject | explosion autoclave | en |
dc.title | Vliv iniciačního zdroje na výbuchové parametry hořlavých plynů | cs |
dc.title.alternative | Influence of the ignition source on the explosion paramters of flammable gases | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Mynarz, Miroslav | |
dc.date.accepted | 2023-05-30 | |
dc.thesis.degree-name | Ing. | |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská – Technická univerzita Ostrava. Fakulta bezpečnostního inženýrství | cs |
dc.description.department | 030 - Katedra požární ochrany | cs |
dc.thesis.degree-program | Požární ochrana a průmyslová bezpečnost | cs |
dc.thesis.degree-branch | Technika požární ochrany a bezpečnosti průmyslu | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2720 | |
dc.identifier.thesis | STO0148_FBI_N3908_3908T006_2023 | |
dc.rights.access | openAccess | |