dc.contributor.advisor | Pustějovská, Pavlína | |
dc.contributor.author | Sikora, Michal | |
dc.date.accessioned | 2024-06-27T17:07:49Z | |
dc.date.available | 2024-06-27T17:07:49Z | |
dc.date.issued | 2024 | |
dc.identifier.other | OSD002 | |
dc.identifier.uri | http://hdl.handle.net/10084/152746 | |
dc.description.abstract | Disertační práce shrnuje problematiku možnosti náhrady paliva pro spékání, koksového prachu za ekonomicky a ekologicky vhodnější palivo, antracit. Hlavní pozornost je zaměřena na možnost nahrazení koksového prachu antracitem, při kterém se urychlí proces výměny, ale zároveň jsou ovlivněny i další vlastnosti. Provedené analýzy ukázaly, že nahrazení různého množství antracitu koksovým prachem nemá negativní vliv při stejné počáteční propustnosti aglomeračního lože.
Provozně byly odzkoušeny, při výrobě aglomerátu, různé poměry náhrady koksového prachu antracitem. Laboratorně pak byl testován (zkouška ISO 4695) aglomerát jen s koksovým prachem a aglomerát jen s antracitem. | cs |
dc.description.abstract | The dissertation summarises the issue of the possibility of replacing the coke breeze sintering fuel with an economically and ecologically more suitable fuel, anthracite. The main attention is focused on the possibility of replacing coke breeze with anthracite, during which the replacement process is accelerated, but at the same time other properties are also affected. The analyses performed showed that replacement of different amounts of anthracite with coke breeze does not have a negative effect if the initial permeability of the sintering bed is the same.
During the production of sinter, different ratios of replacement of coke dust with anthracite were operationally tested. The sinter with only coke breeze and the sinter with only anthracite were tested in the laboratory (ISO 4695 test). | en |
dc.format.extent | 3710308 bytes | |
dc.format.mimetype | application/pdf | |
dc.language.iso | cs | |
dc.publisher | Vysoká škola báňská – Technická univerzita Ostrava | cs |
dc.subject | náhrada paliva | cs |
dc.subject | analýza | cs |
dc.subject | provozní testy | cs |
dc.subject | redukovatelnost | cs |
dc.subject | Substitution of fuel | en |
dc.subject | analysis | en |
dc.subject | operational tests | en |
dc.subject | reducibility | en |
dc.title | Technologické aspekty využívání antracitu pro zlepšení vlastností aglomerátu | cs |
dc.title.alternative | Technological aspects of anthracite use to improve properties of sinter | en |
dc.type | Disertační práce | cs |
dc.contributor.referee | Besta, Petr | |
dc.contributor.referee | Baricová, Dana | |
dc.contributor.referee | Ličáková, Pavla | |
dc.date.accepted | 2024-05-20 | |
dc.thesis.degree-name | Ph.D. | |
dc.thesis.degree-level | Doktorský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská – Technická univerzita Ostrava. Fakulta materiálově-technologická | cs |
dc.description.department | 652 - Katedra metalurgických technologií | cs |
dc.thesis.degree-program | Metalurgie | cs |
dc.thesis.degree-branch | Metalurgická technologie | cs |
dc.description.result | vyhověl | cs |
dc.identifier.sender | S2736 | |
dc.identifier.thesis | SIK0039_FMT_P2106_2109V036_2024 | |
dc.rights.access | openAccess | |