dc.contributor.advisor | Medvec, Zdeněk | en |
dc.contributor.author | Moravec, Petr | en |
dc.date.accessioned | 2010-09-29T13:41:15Z | |
dc.date.available | 2010-09-29T13:41:15Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/78886 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | V této bakalářské práci jsem se zabýval kontrolou vypínacích charakteristik digitální ochrany. Provedl jsem teoretický rozbor ochran a jejich nastavení. Popis terminálu SPAC 315 C a ochranného modulu SPCJ 4D29. Dále jsem ověřil vypínací charakteristiky digitální ochrany a naměřené výsledky jsem v grafech porovnal s vypočítanými výsledky podle údajů výrobce. | cs |
dc.description.abstract | In this bachelor work I was concerned about the control of cut off characteristics of a digital protection. I did a theoretical analyse of protections and thein settings. The description of terminal
SPAC 315 C and the protection modul SPCJ 4D29. Next I checked the cut off characteristics of a digital protection and results confronted in graps, the measured results with calculated values from the manufacturer. | en |
dc.format | 38 l. : il. | cs |
dc.format.extent | 328742 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | digitální ochrana vedení | cs |
dc.subject | zkrat | cs |
dc.subject | proudové přetížení | cs |
dc.subject | vypínací charakteristika | cs |
dc.subject | čas vypnutí | cs |
dc.subject | popudová hodnota proudu | cs |
dc.subject | the digital protection of a wiring | en |
dc.subject | the short | en |
dc.subject | the current overload | en |
dc.subject | the cut off characteristic | en |
dc.subject | cut off time | en |
dc.subject | the impulse value of the current | en |
dc.title | Kontrola vypínacích charakteristik digitální ochrany | cs |
dc.title.alternative | Switching-off Charakteristic Check of Microprocessor Line Protection | en |
dc.type | Bakalářská práce | cs |
dc.contributor.referee | Moldřík, Petr | en |
dc.date.accepted | 2010-05-31 | en |
dc.thesis.degree-name | Bc. | en |
dc.thesis.degree-level | Bakalářský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta elektrotechniky a informatiky | cs |
dc.description.category | Prezenční | cs |
dc.description.department | 451 - Katedra elektroenergetiky | en |
dc.thesis.degree-program | Elektrotechnika | cs |
dc.thesis.degree-branch | Elektroenergetika | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2724 | cs |
dc.identifier.thesis | MOR242_FEI_B2649_3907R001_2010 | |
dc.rights.access | openAccess | |