dc.contributor.advisor | Damec, Jaroslav | en |
dc.contributor.author | Jaržembovský, Štefan | en |
dc.date.accessioned | 2010-09-29T13:55:56Z | |
dc.date.available | 2010-09-29T13:55:56Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/79160 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | Diplomová práce pojednává o inertizaci hybridních směsí prachovými inerty.
V úvodní teoretické části jsou shrnuty základní poznatky o výbuchu a vysvětleny pojmy hybridní směs a inertizace. Ve druhé části jsou zpracovány výsledky měření, které bylo prováděno ve výbuchové komoře VK-100. Při měření byl zkoumán vliv tří inertních prachů na výbušnost hybridní směsi hnědé uhlí - metan – vzduch a zjišťovalo se jejich množství potřebné k inertizaci této směsi. Naměřené výsledky byly vyhodnoceny a vyneseny do grafů. | cs |
dc.description.abstract | The dissertation deals with inertization of hybrid mixture by dust inerts.
In the theoretical part, the basic knowledge of an explosion is summed up and moreover, also terms as a hybrid mixture and inertization are explained there. The second part deals with the results of measurement which was taken in the explosive chamber VK-100. During this measurement, I studied the influence of three types of inert dust on explosiveness of hybrid mixture – lignite – methane – air and also the amount of inert dust required for the inertization of the mixture. The measured results have been analyzed and recorded in graphs. | en |
dc.format | 53, [17] l. : il. | cs |
dc.format.extent | 3489875 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | hybridní směs | cs |
dc.subject | inertizace | cs |
dc.subject | prach | cs |
dc.subject | výbuch | cs |
dc.subject | inerting | en |
dc.subject | explosion | en |
dc.subject | dust | en |
dc.subject | hybrid mixture | en |
dc.title | Inertizace hybridních směsí prachovými inerty | cs |
dc.title.alternative | Inerting of Hybrid Mixtures Using Dust Inerts | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Mokoš, Ladislav | en |
dc.date.accepted | 2010-06-02 | en |
dc.thesis.degree-name | Ing. | en |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta bezpečnostního inženýrství | cs |
dc.description.category | Prezenční | cs |
dc.description.department | 040 - Katedra bezpečnostního managementu | en |
dc.thesis.degree-program | Požární ochrana a průmyslová bezpečnost | cs |
dc.thesis.degree-branch | Bezpečnostní inženýrství | cs |
dc.description.result | výborně | cs |
dc.identifier.sender | S2720 | cs |
dc.identifier.thesis | JAR144_FBI_N3908_3908T002_2010 | |
dc.rights.access | openAccess | |