Zobrazit minimální záznam

dc.contributor.advisorTichá, Šárkaen
dc.contributor.authorKrisl, Lukášen
dc.date.accessioned2010-09-29T15:45:23Z
dc.date.available2010-09-29T15:45:23Z
dc.date.issued2010en
dc.identifier.otherOSD002cs
dc.identifier.urihttp://hdl.handle.net/10084/81249
dc.descriptionImport 29/09/2010cs
dc.description.abstractDiplomová práce obsahuje rozbor problematiky měření a kontroly rovinného úhlu. V úvodu je charakterizována problematika kalibrace vodováh ve firmě UNIMETRA spol.s r.o., jejíž řešením se práce zabývá. V teoretické části jsou popsány poznatky z oblasti měření a kontroly rovinného úhlu. V dalších částech je analyzován současný způsob kalibrace vodováh v podniku UNIMETRA spol. s r.o., proveden návrh nové metody a rozbor její realizace. Součástí práce je praktické ověření nově navrhovaného způsobu kalibrace vodová, porovnání se současnou metodou a jeho zhodnocení.cs
dc.description.abstractThe thesis contains an analysis of problems of measurement and control of plane angle. Questions of calibration of the water levels in the company UNIMETRA spol s r.o., whose thesis deals with the solution, is characterized in the introduction. The theoretical part describes the findings in the field of measurement and control plane angle. The next section analyzes the present method of calibration of the water levels in the company UNIMETRA spol. s r.o., made the proposal a new method of analysis and its implementation. Part of this work is a practical verification of the newly proposed method of calibration levels, compared with the current method and its evaluation.en
dc.format.extent1349097 bytescs
dc.format.mimetypeapplication/pdfcs
dc.language.isocsen
dc.publisherVysoká škola báňská - Technická univerzita Ostravacs
dc.subjectvodováhacs
dc.subjectkalibracecs
dc.subjectpřípravekcs
dc.subjectspirit levelen
dc.subjectcalibrationen
dc.subjectpreparationen
dc.titleKalibrace vodováhcs
dc.title.alternativeWater Level Calibrationen
dc.typeDiplomová prácecs
dc.contributor.refereeVavřina, Janen
dc.date.accepted2010-06-07en
dc.thesis.degree-nameIng.en
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská - Technická univerzita Ostrava. Fakulta strojnícs
dc.description.department346 - Katedra obrábění a montážeen
dc.thesis.degree-programStrojní inženýrstvícs
dc.thesis.degree-branchStrojírenská technologiecs
dc.description.resultvelmi dobřecs
dc.identifier.senderS2723cs
dc.identifier.thesisKRI297_FS_N2301_2303T002_2010
dc.rights.accessopenAccess


Soubory tohoto záznamu

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam