Zobrazit minimální záznam

dc.contributor.advisorPraus, Petren
dc.contributor.authorSerenčíšová, Janaen
dc.date.accessioned2010-09-29T16:16:16Z
dc.date.available2010-09-29T16:16:16Z
dc.date.issued2010en
dc.identifier.otherOSD002cs
dc.identifier.urihttp://hdl.handle.net/10084/81808
dc.descriptionImport 29/09/2010cs
dc.description.abstractTato diplomová práce se zabývá turbidimetrickým stanovením síranů v různých typech vod. Podstatou metody je vytvoření stabilní mikrosuspenze síranu barnatého při srážení SO42- iontů barnatou solí v přítomnosti stabilizačního činidla. Studie předkládá výsledky za použití viskózního glycerolu, tenzidů a kvartérních amonných solí. Jako nejvhodnější se osvědčil tetrabutylamonium jodid, na základě kterého byla následně provedena validace této turbidimetrické metody s detekčním limitem 9,33 mg.l-1 a analytickým rozsahem 24,5 – 150 mg.l-1 SO42-.cs
dc.description.abstractThis thesis deals with the turbidimetric detection of sulphates in the different types of water. The method is based on the formation of stable microsuspension of barium sulphate. This can be achieved by precipitation of SO42- ions with barium ions in the presence of stabilizing agents. The study compares the results of using viscous glycerole, surfactants and quaternary amonium salts. Tetrabutylamonnium iodide was identified as the optimal reagent and used for subsequent validation of the turbidimetric method with the detection limit of 9,33 mg.l-1 and analytical range of 24,5 – 150 mg.l-1 SO42-.en
dc.format.extent448370 bytescs
dc.format.mimetypeapplication/pdfcs
dc.language.isocsen
dc.publisherVysoká škola báňská - Technická univerzita Ostravacs
dc.subjectstanovenícs
dc.subjectsíranycs
dc.subjectturbidimetriecs
dc.subjectvodacs
dc.subjectdeterminationen
dc.subjectsulphateen
dc.subjectturbidimetryen
dc.subjectwateren
dc.titleTurbidimetrické stanovení síranů ve vodáchcs
dc.title.alternativeTurbidimetric determination of sulphate in wateren
dc.typeDiplomová prácecs
dc.contributor.refereeVontorová, Jiřinaen
dc.date.accepted2010-05-27en
dc.thesis.degree-nameIng.en
dc.thesis.degree-levelMagisterský studijní programcs
dc.thesis.degree-grantorVysoká škola báňská - Technická univerzita Ostrava. Fakulta metalurgie a materiálového inženýrstvícs
dc.description.department615 - Katedra analytické chemie a zkoušení materiáluen
dc.thesis.degree-programProcesní inženýrstvícs
dc.thesis.degree-branchChemické a fyzikální metody zkoušení materiálucs
dc.description.resultvýborněcs
dc.identifier.senderS2736cs
dc.identifier.thesisSER033_FMMI_N3909_3911T008_2010
dc.rights.accessopenAccess


Soubory tohoto záznamu

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam