dc.contributor.advisor | Kret, Ján | en |
dc.contributor.author | Tomis, Jiří | en |
dc.date.accessioned | 2010-09-29T16:18:02Z | |
dc.date.available | 2010-09-29T16:18:02Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/81842 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | Tato diplomová práce se zabývá ohřevem grafitu, oxidů železa a nízkoteplotní redukcí oxidů železa, přičemž je rozdělena na teoretickou a praktickou část. Teoretická část se zabývá historií mikrovlnného záření, mikrovlnnými efekty a účinky mikrovln na lidský organismus. V experimentální části proběhly zkušební ohřevy materiálů a redukce čistých oxidů. V této části bylo zjištěno, že při ohřevu grafitu a Fe3O4 lze dosáhnout velmi vysokých teplot (nad 1200°C ) a že při přidání grafitu k Fe2O3 a následnému ohřevu, dochází k redukci Fe2O3 na Fe3O4. Jedná se tedy o technologii použitelnou v praxi. | cs |
dc.description.abstract | This work goes into the heating of the graphite, the iron oxide and the low-temperature reduction of the iron oxides, whereas is devided into the theoretical and the practical parts. The theoretical part goes into the history of the microwave radiation, the microwave effects and the effect of microwave radiation on the human’s organism. In the experimental part there were examinable heating of materials and reduction of the iron oxides. In this part was found out that during the heating of the graphite and Fe3O4 is possible to get very high temperature (over 1200°C). It was also found out that with adding the graphite to Fe2O3 and consequential heating there is reduction of Fe2O3 on Fe3O4. In that case we are talking about technology which is applicable to the use. | en |
dc.format.extent | 3557272 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | nízkoteplotní redukce | cs |
dc.subject | ohřev | cs |
dc.subject | mikrovlnné záření | cs |
dc.subject | oxidy železa | cs |
dc.subject | mikrovlnné efekty | cs |
dc.subject | low – temperature reduction | en |
dc.subject | microwave effects | en |
dc.subject | iron oxide | en |
dc.subject | heating | en |
dc.subject | microwave radiation | en |
dc.title | Nízkoteplotní redukce pomocí mikrovlnného záření | cs |
dc.title.alternative | Low Temperature Reduction Width Microwawe | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Bilík, Jiří | en |
dc.date.accepted | 2010-05-25 | en |
dc.thesis.degree-name | Ing. | en |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta metalurgie a materiálového inženýrství | cs |
dc.description.department | 618 - Katedra metalurgie | en |
dc.contributor.consultant | Raclavský, Milan | en |
dc.thesis.degree-program | Metalurgické inženýrství | cs |
dc.thesis.degree-branch | Technologie výroby kovů | cs |
dc.description.result | dobře | cs |
dc.identifier.sender | S2736 | cs |
dc.identifier.thesis | TOM453_FMMI_N2109_2109T035_2010 | |
dc.rights.access | openAccess | |