dc.contributor.advisor | Tomková, Václava | en |
dc.contributor.author | Volková, Anežka | en |
dc.date.accessioned | 2010-09-29T16:21:35Z | |
dc.date.available | 2010-09-29T16:21:35Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/81909 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | Diplomová práce se zabývá přípravou alkalicky aktivovaných hmot na bázi významné druhotné suroviny – granulované vysokopecní strusky. Fázové složení a tedy i vlastnosti kompozitů byly modifikovány přídavky 5 a 10 hm. % metakaolinu získaného žíháním kaolinu na 600 °C. Přídavky metakaolinu mírně snižují pevnosti v tlaku a objemové hmotnosti hmot. Stupňovité žíhání vzorků potvrdilo trvanlivost všech zkoušených typů hmot do teploty 1000 °C, důkazem jsou pevnosti v tlaku na úrovni 15 20 MPa u žíhaných vzorků. Přídavek metakaolinu způsobí obměnu fázového složení hmot směrem k zeolitickým fázím, což zvýší trvanlivost a korozní odolnost hmot tohoto složení. | cs |
dc.description.abstract | The thesis deals with the preparation of alkali activated materials based on important secondary material - granulated blast furnace slag. Phase composition and properties of composites were modified with 5 and 10 wt.%. of metakaoline obtained by kaoline temperated at 600 °C. Additions of metakaoline slightly lower compressive strength and bulk density of materials. The samples which were stepped tempered confirmed the durability of all types of test materials to 1000 °C. Indicate are the compressive strength at 15 to 20 MPa for tempered samples. Addition of metakaoline to samples changes of phase composition of materials toward zeolite phases. As a result is increasing stabillity and corrosion resistance of the materials by this compostition. | en |
dc.format.extent | 1835057 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | granulovaná vysokopecní struska | cs |
dc.subject | geopolymery | cs |
dc.subject | alkalicky-aktivovaná pojiva | cs |
dc.subject | pevnosti v tlaku | cs |
dc.subject | rtg fázová analýza | cs |
dc.subject | X-ray difraction analysis | en |
dc.subject | alkali-activated binders | en |
dc.subject | geopolymers | en |
dc.subject | granulated blast furnace slag | en |
dc.subject | compressive strength | en |
dc.title | Tepelná stabilita alkalicky aktivovaných (geopolymerních) kompozitů | cs |
dc.title.alternative | Thermal Stability of Alkali-Activated (Geopolymer) Composites | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Hoffmann, Oldřich | en |
dc.date.accepted | 2010-05-25 | en |
dc.thesis.degree-name | Ing. | en |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta metalurgie a materiálového inženýrství | cs |
dc.description.department | 635 - Katedra tepelné techniky | en |
dc.contributor.consultant | Bábková, Petra | en |
dc.thesis.degree-program | Metalurgické inženýrství | cs |
dc.thesis.degree-branch | Tepelná technika a průmyslová keramika | cs |
dc.description.result | výborně | cs |
dc.identifier.sender | S2736 | cs |
dc.identifier.thesis | VOL174_FMMI_N2109_2109T025_2010 | |
dc.rights.access | openAccess | |