dc.contributor.advisor | Bujok, Petr | en |
dc.contributor.author | Zubatý, Zdislav | en |
dc.date.accessioned | 2010-09-29T16:49:00Z | |
dc.date.available | 2010-09-29T16:49:00Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/82416 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | V předložené práci jsou zpracovány pracovní postupy při cementování vrtů v ČR a požití “TCP“. Na začátku téhle práce jsou popsány tipy cementací a příprava cementových směsí. Později jsou popsány technologické postupy a technické prostředky pro kvalitní cementace a využití “TCP“ po cementaci. Metoda pulzování cementové směsi ve vrtu se v ČR ještě nepoužívá, ale věřím, že je to dobrá metoda k zabránění migrace plynu. | cs |
dc.description.abstract | In this task there are processed the operating procedures in the well cementation in the Czech Republic and application of the TCP. At the beginning of this study there are the types of cementation described and the preparation of cement slurry. Later there are described the technological procedures and the technical instruments for the top cementation and the use of TCP after cementing. The method of cement slurry pulsation in well is not applied in the Czech Republic yet but I hope that it is a good method for prevention of gas migration. | en |
dc.format | 66 l. : il. | cs |
dc.format.extent | 3657543 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | cementační pulsace | cs |
dc.subject | migrace plynu | cs |
dc.subject | cementová kaše | cs |
dc.subject | cementace vrtů | cs |
dc.subject | cement pulsation | en |
dc.subject | gas migration | en |
dc.subject | cement slurry | en |
dc.subject | wells cementing | en |
dc.title | Cementace vrtů a využití "Top Cement Pulsation" technologie v ČR | cs |
dc.title.alternative | Well Cementing and Application of the Top Cement Pulstation Technology in Czech Republic | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Duroň, Jan | en |
dc.date.accepted | 2010-06-04 | en |
dc.thesis.degree-name | Ing. | en |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Hornicko-geologická fakulta | cs |
dc.description.category | Prezenční | cs |
dc.description.department | 541 - Institut geologického inženýrství | en |
dc.thesis.degree-program | Geologické inženýrství | cs |
dc.thesis.degree-branch | Geologické inženýrství | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2735 | cs |
dc.identifier.thesis | ZUB025_HGF_N2110_2101T003_2010 | |
dc.rights.access | openAccess | |