dc.contributor.advisor | Mazalová, Jana | en |
dc.contributor.author | Král, Jan | en |
dc.date.accessioned | 2010-09-29T17:05:57Z | |
dc.date.available | 2010-09-29T17:05:57Z | |
dc.date.issued | 2010 | en |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/82732 | |
dc.description | Import 29/09/2010 | cs |
dc.description.abstract | Bakalářská práce popisuje postup a průběh geodetických prací při výstavbě komunikace: Přeložka silnice I/7 – I. etapa Chomutov - Křímov. V první části bakalářská práce popisuje lokalitu, vytyčovací síť a geodetickou projektovou dokumentaci. V další části popisuje vytyčování podrobných bodů komunikace a kontrolní vytyčení podrobných bodů komunikace s využitím metod polárního vytyčení, trigonometrického určování výšek a nivelace ze středu. V další části popisuje zaměření skutečného provedení vrstvy komunikace s využitím polární metody. Následují výpočty a vyhodnocení získaných dat a grafické zpracování ve specializovaném softwaru. Hlavním prvkem bakalářské práce jsou tabulky naměřených hodnot, účelová mapa a podélné a příčné profily obsažené v příloze. | cs |
dc.description.abstract | The Bachelor work describes procedure and course of geodetic works during the road construction: Transfer of the road 1/7 – 1.stage Chomutov – Křímov. In the opening part, the work describes locality, setting out net and a survey project documentation. Afterwards, the work describes setting out of the road detail survey points and a control setting out of the detail survey points with the use of polar setting out methods, trigonometric leveling and a levelling from the center between the rods. In the next part, surveying the as-build construction with the use of polar method is described. This is followed by calculations and evaluation of obtained data and their graphic presentation by specialized software. The attached charts of measured values, thematical map, longitudinal and cross sections are the main point of the Bachelor work. | en |
dc.format | 37, [17] l. : il. + 1 CD-R | cs |
dc.format.extent | 1947915 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | en |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | vytyčovací síť | cs |
dc.subject | mezní vytyčovací odchylka | cs |
dc.subject | kontrolní měření | cs |
dc.subject | nivelace ze středu | cs |
dc.subject | podélný profil | cs |
dc.subject | příčný profil | cs |
dc.subject | setting out net | en |
dc.subject | permitted setting-out deviation | en |
dc.subject | control measurement | en |
dc.subject | levelling from the center between the rods | en |
dc.subject | longitudinal section | en |
dc.subject | cross section | en |
dc.title | Geodetické práce při výstavbě komunikace Přeložka silnice I/7 - I.etapa Chomutov-Křímov | cs |
dc.title.alternative | Geodetic Works During the Construction of a Road Transfer of Road I/7 - I.Stage Chomutov-Křimov | en |
dc.type | Bakalářská práce | cs |
dc.contributor.referee | Bedrunka, Michal | en |
dc.date.accepted | 2010-06-09 | en |
dc.thesis.degree-name | Bc. | en |
dc.thesis.degree-level | Bakalářský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Hornicko-geologická fakulta | cs |
dc.description.category | Prezenční | cs |
dc.description.department | 544 - Institut geodézie a důlního měřictví | en |
dc.thesis.degree-program | Geodézie a kartografie | cs |
dc.thesis.degree-branch | Inženýrská geodézie | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2735 | cs |
dc.identifier.thesis | KRA774_HGF_B3646_3646R007_2010 | |
dc.rights.access | openAccess | |