dc.contributor.advisor | Vrtek, Mojmír | cs |
dc.contributor.author | Kramoliš, Michal | cs |
dc.date.accessioned | 2012-07-11T07:59:14Z | |
dc.date.available | 2012-07-11T07:59:14Z | |
dc.date.issued | 2012 | cs |
dc.identifier.other | OSD002 | cs |
dc.identifier.uri | http://hdl.handle.net/10084/93730 | |
dc.description | Import 03/08/2012 | cs |
dc.description.abstract | Diplomová práce se zabývá návrhem systému na vytápění a přípravu teplé užitkové vody s využitím tepelného čerpadla voda – voda. Práce obsahuje výpočet tepelných ztrát domu a celkové spotřeby tepla na vytápění a ohřev teplé užitkové vody během roku,
na základě čehož jsem pak navrhnul jednotlivé části tepelného čerpadla a celého otopného systému domu. V závěru práce jsem poté provedl ekonomické srovnání provozu stávajícího plynového kotle a nákladů na pořízení a provoz navrženého topného systému, a také srovnání vlivu obou složek na životní prostředí. | cs |
dc.description.abstract | This master thesis describes the design of a system for heating and preparing warm service water using water to water heat pump. This work includes the calculation of building heat loss and total heat consumption for heating and warming service water during the year. On the basis of this I suggested individual components of the heat pump and the whole system of building heating. At the end of the work I performed an economic comparisonof the current gas boiler work with the costs of acquisition and operation of the designed heating system, and also comparison of the influence of both components on the environment. | en |
dc.format.extent | 4867600 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | cs | cs |
dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | cs |
dc.subject | Tepelné čerpadlo | cs |
dc.subject | voda | cs |
dc.subject | vytápění | cs |
dc.subject | studna | cs |
dc.subject | Heat pump | en |
dc.subject | water | en |
dc.subject | heating | en |
dc.subject | water well | en |
dc.title | Návrh tepelného čerpadla voda - voda | cs |
dc.title.alternative | Water to Water Heat Pump Design | en |
dc.type | Diplomová práce | cs |
dc.contributor.referee | Procházka, Vít | cs |
dc.date.accepted | 2012-06-11 | cs |
dc.thesis.degree-name | Ing. | cs |
dc.thesis.degree-level | Magisterský studijní program | cs |
dc.thesis.degree-grantor | Vysoká škola báňská - Technická univerzita Ostrava. Fakulta strojní | cs |
dc.description.department | 361 - Katedra energetiky | cs |
dc.thesis.degree-program | Strojní inženýrství | cs |
dc.thesis.degree-branch | Energetické stroje a zařízení | cs |
dc.description.result | velmi dobře | cs |
dc.identifier.sender | S2723 | cs |
dc.identifier.thesis | KRA757_FS_N2301_2302T006_2012 | |
dc.rights.access | openAccess | |