| dc.contributor.author | Kunčická, Lenka | |
| dc.contributor.author | Štěpán, Petr | |
| dc.contributor.author | Kliber, Jiří | |
| dc.contributor.author | Mamuzić, Ilija | |
| dc.date.accessioned | 2013-11-28T12:59:16Z | |
| dc.date.available | 2013-11-28T12:59:16Z | |
| dc.date.issued | 2014 | |
| dc.identifier.citation | Metalurgija. 2014, vol. 53, no. 2, p. 186-188. | cs |
| dc.identifier.issn | 0543-5846 | |
| dc.identifier.issn | 1334-2576 | |
| dc.identifier.uri | http://hdl.handle.net/10084/101304 | |
| dc.description.abstract | Ti-Nb alloys are of a large potential for industrial, as well as biomedical utilisation. Oxygen content in the alloy is a
parameter infl uencing its properties and cannot be neglected. The main focus of this paper is on observation of
infl uence of annealing time on oxygen content in the structure of Ti – 20,7 (at.)% Nb alloy. Four groups of the samples
were annealed at the temperature of 800 °C from 15 to 60 minutes with 15 min. step. As it was proven by the
analysis, the oxygen content increased with increasing annealing time. Moreover, microhardness measurements
showed increasing trend of HV microhardness value with increasing oxygen content. | cs |
| dc.format.extent | 511747 bytes | |
| dc.format.mimetype | application/pdf | |
| dc.language.iso | en | cs |
| dc.publisher | Hrvatsko Metalurško Društvo | cs |
| dc.relation.ispartofseries | Metalurgija | cs |
| dc.relation.uri | http://hrcak.srce.hr/file/162233 | cs |
| dc.subject | titanium | cs |
| dc.subject | oxygen content | cs |
| dc.subject | microhardness | cs |
| dc.title | Influence of heat treatment on properties of Ti-Nb alloys | cs |
| dc.type | article | cs |
| dc.rights.access | openAccess | |
| dc.type.version | publishedVersion | cs |
| dc.type.status | Peer-reviewed | cs |
| dc.description.source | Web of Science | cs |
| dc.description.volume | 53 | cs |
| dc.description.issue | 2 | cs |
| dc.description.lastpage | 188 | cs |
| dc.description.firstpage | 186 | cs |
| dc.identifier.wos | 000326142100010 | |