Microstructure and plastic properties of mg-Li alloys smelted in vacuum induction furnaces after hot working

Hadasik, Eugeniusz; Kuc, Dariusz; Mikuszewski, Tomasz; Schindler, Ivo

dc.contributor.author	Hadasik, Eugeniusz
dc.contributor.author	Kuc, Dariusz
dc.contributor.author	Mikuszewski, Tomasz
dc.contributor.author	Schindler, Ivo
dc.date.accessioned	2017-11-09T06:54:57Z
dc.date.available	2017-11-09T06:54:57Z
dc.date.issued	2017
dc.identifier.citation	Archives of Metallurgy and Materials. 2017, vol. 62, issue 3, p. 1427-1432.	cs
dc.identifier.issn	1733-3490
dc.identifier.issn	2300-1909
dc.identifier.uri	http://hdl.handle.net/10084/121330
dc.description.abstract	The paper analyses the characteristics of plasticity and microstructure of magnesium alloys with lithium meant for hot plastic working with different lithium content. The alloys were prepared in conditions of vacuum smelting. Achieved ingots were subject to hot extrusion. Tests on Gleeble simulator were conducted to assess the susceptibility of tested alloys to plastic forming in conditions of hot plastic working. For tested alloy the activation energy was marked for hot plastic deformation and plasticity characteristics in function of Zener-Hollomon parameter. After the analysis of the influence of temperature on the deformability of tested alloys it was stated that the alloy containing 8% Li (LAZ831) has better susceptibility to plastic treatment than alloy containing 4% Li (LAZ431), but higher than in case of classic magnesium alloys-AZ31.	cs
dc.format.extent	2052797 bytes
dc.format.mimetype	application/pdf
dc.language.iso	en	cs
dc.publisher	Polska Akademia Nauk	cs
dc.relation.ispartofseries	Archives of Metallurgy and Materials	cs
dc.relation.uri	https://doi.org/10.1515/amm-2017-0220	cs
dc.rights	© Polish Academy of Sciences. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.	cs
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0/	cs
dc.subject	magnesium-lithium alloy	cs
dc.subject	research of plasticity	cs
dc.subject	activation energy	cs
dc.subject	hot working microstructure	cs
dc.title	Microstructure and plastic properties of mg-Li alloys smelted in vacuum induction furnaces after hot working	cs
dc.type	article	cs
dc.identifier.doi	10.1515/amm-2017-0220
dc.rights.access	openAccess	cs
dc.type.version	publishedVersion	cs
dc.type.status	Peer-reviewed	cs
dc.description.source	Web of Science	cs
dc.description.volume	62	cs
dc.description.issue	3	cs
dc.description.lastpage	1432	cs
dc.description.firstpage	1427	cs
dc.identifier.wos	000413332900001

Files in this item

Name:: 1733-3490-2017v62i3p1427.pdf
Size:: 1.957Mb
Format:: PDF

View/Open

This item appears in the following Collection(s)

Publikační činnost VŠB-TUO ve Web of Science / Publications of VŠB-TUO in Web of Science [7798]
Kolekce obsahuje bibliografické záznamy článků akademických pracovníků VŠB-TUO publikovaných v časopisech indexovaných ve Web of Science od roku 1990 po současnost.
Publikační činnost Katedry tváření materiálu / Publications of Department of Materials Forming (633) [136]
Kolekce obsahuje bibliografické záznamy publikační činnosti (článků) akademických pracovníků Katedry tváření materiálu (633) v časopisech registrovaných ve Web of Science od roku 2003 do roku 2022.
OpenAIRE [5085]
Kolekce určená pro sklízení infrastrukturou OpenAIRE; obsahuje otevřeně přístupné publikace, případně další publikace, které jsou výsledkem projektů rámcových programů Evropské komise (7. RP, H2020, Horizon Europe).
Články z časopisů s impakt faktorem / Articles from Impact Factor Journals [6377]
Články z časopisů (od roku 2008), které v době vydání článku měly impakt faktor.

Show simple item record

© Polish Academy of Sciences. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Except where otherwise noted, this item's license is described as © Polish Academy of Sciences. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.