Zobrazit minimální záznam

Transformation diagrams of selected steel grades with consideration of deformation effect

dc.contributor.authorKawulok, Rostislav
dc.contributor.authorSchindler, Ivo
dc.contributor.authorMizera, Jarosław
dc.contributor.authorKawulok, Petr
dc.contributor.authorRusz, Stanislav
dc.contributor.authorOpěla, Petr
dc.contributor.authorPodolinský, Petr
dc.contributor.authorČmiel, Karel Milan
dc.contributor.authorMališ, Michael
dc.date.accessioned2018-05-28T11:45:26Z
dc.date.available2018-05-28T11:45:26Z
dc.date.issued2018
dc.identifier.citationArchives of Metallurgy and Materials. 2018, vol. 63, issue 1, p. 55-60.cs
dc.identifier.issn1733-3490
dc.identifier.issn2300-1909
dc.identifier.urihttp://hdl.handle.net/10084/127194
dc.description.abstractThe aim of this article was to assess the effect of previous plastic deformation on the transformation kinetics of selected steels with a wide range of chemical composition. Transformation (CCT and DCCT) diagrams were constructed on the basis of dilatometric tests on the plastometer Gleeble 3800 and metallographic analyses supplemented by measurements of HV hardness. Effect of previous deformation on transformation was evaluated of the critical rate of formation of the individual structural components (ferrite, pearlite and bainite) in the case of formation of martensite respect to M-s temperature. Previous plastic deformation accelerated especially diffuse transformations (ferrite and pearlite), temperature of M-s was lower after previous plastic deformation and bainitic transformation was highly dependent on the chemical composition of steel.cs
dc.format.extent2710299 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoencs
dc.publisherPolska Akademia Naukcs
dc.relation.ispartofseriesArchives of Metallurgy and Materialscs
dc.relation.urihttps://doi.org/10.24425/118908cs
dc.subjecttransformation diagrams of steelscs
dc.subjectphase transformationcs
dc.subjectplastic deformationcs
dc.subjectdilatometric testscs
dc.subjectGleeble 3800cs
dc.titleTransformation diagrams of selected steel grades with consideration of deformation effectcs
dc.typearticlecs
dc.identifier.doi10.24425/118908
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume63cs
dc.description.issue1cs
dc.description.lastpage60cs
dc.description.firstpage55cs
dc.identifier.wos000432340700008


Soubory tohoto záznamu

Název:
1733-3490-2018v63i1p55.pdf
Velikost:
2.584Mb
Formát:
PDF
Zobrazit/otevřít

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam