Zobrazit minimální záznam

Analysis of welded joint properties on an AISI316L stainless steel tube manufactured by SLM technology

dc.contributor.authorMohyla, Petr
dc.contributor.authorHajnyš, Jiří
dc.contributor.authorSternadelová, Kristýna
dc.contributor.authorKrejčí, Lucie
dc.contributor.authorPagáč, Marek
dc.contributor.authorKonečná, Kateřina
dc.contributor.authorKrpec, Pavel
dc.date.accessioned2021-01-06T09:01:05Z
dc.date.available2021-01-06T09:01:05Z
dc.date.issued2020
dc.identifier.citationMaterials. 2020, vol. 13, issue 19, art. no. 4362.cs
dc.identifier.issn1996-1944
dc.identifier.urihttp://hdl.handle.net/10084/142535
dc.description.abstractThis work is focused on the analysis of the influence of welding on the properties and microstructure of the AISI316L stainless steel tube produced by 3D printing, specifically the SLM (Selective Laser Melting) method. Both non-destructive and destructive tests, including metallographic and fractographic analyses, were performed within the experiment. Microstructure analysis shows that the initial texture of the 3D print disappears toward the fuse boundary. It is evident that high temperature during welding has a positive effect on microstructure. Material failure occurred in the base material near the heat affected zone (HAZ). The results obtained show the fundamental influence of SLM technology in terms of material defects, on the properties of welded joints.cs
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofseriesMaterialscs
dc.relation.urihttp://doi.org/10.3390/ma13194362cs
dc.rights© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectselective laser meltingcs
dc.subjectwelded jointscs
dc.subjectmicrostructurecs
dc.subjectmechanical propertiescs
dc.titleAnalysis of welded joint properties on an AISI316L stainless steel tube manufactured by SLM technologycs
dc.typearticlecs
dc.identifier.doi10.3390/ma13194362
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume13cs
dc.description.issue19cs
dc.description.firstpageart. no. 4362cs
dc.identifier.wos000586734600001


Soubory tohoto záznamu

Název:
1996-1944-2020v13i19an4362.pdf
Velikost:
9.827Mb
Formát:
PDF
Zobrazit/otevřít

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.