The effect of MWCNT modification on structural and morphological properties of Li4Ti5O12

Abstract

Lithium titanium oxide (Li4Ti5O12) particles were surface-modified with 1-5% wt. of multi-walled carbon nanotubes (MWCNT) using a new low temperature method (LTM). Subsequent techniques have been applied to characterize all materials: X-ray powder diffraction (XRD), Raman and X-ray photoelectron (XPS) spectroscopy, scanning electron (SEM), transmission (STEM), and atomic force (AFM) microscopy. The selected materials have been subjected to preliminary electrochemical analysis. The effect of the synthesis conditions on the obtained series of LTO/1-5% wt. MWCNT nanocomposites was analyzed. X-ray diffraction showed that the crystal structure of LTO is not affected by the multi-walled carbon nanotubes (MWCNT) modification. Raman spectroscopy confirms the XRD results that the MWCNTs do not affect the LTO structure and all nanocomposites show similar levels of defects and/or degree of graphitization. The XPS measurements showed the most intense line at the binding energy of 284.5 eV, which corresponds to the C=C/C-C bonding in carbon atoms in the graphitic structure on the surface of the LTO material. Additionally, the peak at 285.3 eV was attributed to aliphatic structures, edges, and defects in the graphitic nanotube structure, whereas the peaks at 286.1, 287.6, 289.0 and 290.1 eV, correspond to C-O, C- O, HO-C=O, and OCOO, carbon atoms attached to different oxygen-containing moieties, respectively. CNTs were well distributed between LTO particles, as revealed by STEM observations. Single CNTs or agglomerates by joining LTO particles created cross-links for electron transfer. The relationship and effect between the structural and morphological analysis of spinel Li4Ti5O12 structure modified with carbon nanotubes was examined for the first time in this work. The performed preliminary electrochemical measurements revealed that the best electrochemical properties was obtained for LTO powder modified with 1%wt. of MWCNT. After 50 cycles of charge/discharge processes at the current rate of 1 C, the LTO/1%wt. MWCNT powder retained more than 98% of its specific capacity.