Zobrazit minimální záznam

dc.contributor.authorVojtíšek-Lom, Michal
dc.contributor.authorVaculík, Miroslav
dc.contributor.authorPechout, Martin
dc.contributor.authorHopan, František
dc.contributor.authorArul Raj, Alden Fred
dc.contributor.authorPenumarti, Srinath
dc.contributor.authorHorák, Jiří Smokeman
dc.contributor.authorPopovicheva, Olga
dc.contributor.authorOndráček, Jakub
dc.contributor.authorDoušová, Barbora
dc.date.accessioned2021-09-09T08:37:28Z
dc.date.available2021-09-09T08:37:28Z
dc.date.issued2021
dc.identifier.citationScience of the Total Environment. 2021, vol. 788, art. no. 147779.cs
dc.identifier.issn0048-9697
dc.identifier.issn1879-1026
dc.identifier.urihttp://hdl.handle.net/10084/145175
dc.description.abstractAutomobile friction brakes generate, in addition to coarse particles generated by mechanical processes, highly variable amount of nanoparticles from high temperature processes. The effects of braking conditions - speed, deceleration rate, brake rotor temperatures - on nanoparticle production were investigated here, aiming to provide practical guidance for reducing emissions through driving style and traffic management. Typical brake pads and a rotor from a common passenger car were subjected, on a brake dynamometer, to three runs of the WLTP brake cycle developed for brake wear particle measurements. Additionally, four sets of common brake pads were subjected to those parts of standardized brake performance tests believed to be reasonably realistic for common driving. Particle size distributions (5.6-560 nm electric mobility diameter, without removal of volatiles) show a dominant peak at 10 nm commensurate to the severity of braking and a non-linear increase of the total particle number at higher braking powers and higher total energy dissipated. The average emissions for three runs of the WLTP brake cycle were 3.3 x 10(10) particles/km, while the harshest deceleration, 175-100 km/h at 5.28 m.s(-2), has produced 8.4 to 38 x 10(13) particles, corresponding to 2.5-11.5 thousands of km of WLTP-like driving. While previous studies have correlated higher PN production with higher average brake rotor temperature, a more complex relationship between nanoparticle emissions and a combination of initial rotor temperature, total energy dissipated and braking power has been observed here. From a driver behavior and regulatory perspective, it appears limiting harsh braking and braking from high speeds, possibly through improved driving practices, road design and traffic management, may potentially reduce brake wear nanoparticles. From the measurement perspective, it appears that "off-cycle" braking, even if relatively infrequent, may be associated with exponentially higher emissions and non-negligible share of the total emissions, and therefore should not be neglected.cs
dc.language.isoencs
dc.publisherElseviercs
dc.relation.ispartofseriesScience of the Total Environmentcs
dc.relation.urihttps://doi.org/10.1016/j.scitotenv.2021.147779cs
dc.rights© 2021 Published by Elsevier B.V.cs
dc.subjectbrake wearcs
dc.subjectfriction brakescs
dc.subjectnanoparticlescs
dc.subjectoperating conditionscs
dc.subjectoff-cycle emissionscs
dc.subjectnon-exhaust emissionscs
dc.titleEffects of braking conditions on nanoparticle emissions from passenger car friction brakescs
dc.typearticlecs
dc.identifier.doi10.1016/j.scitotenv.2021.147779
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume788cs
dc.description.firstpageart. no. 147779cs
dc.identifier.wos000662648800007


Soubory tohoto záznamu

SouboryVelikostFormátZobrazit

K tomuto záznamu nejsou připojeny žádné soubory.

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam