Zobrazit minimální záznam

Investigation of significant parameters during abrasive waterjet turning

dc.contributor.authorŠtefek, Adam
dc.contributor.authorRaška, Jan
dc.contributor.authorHlaváč, Libor M.
dc.contributor.authorSpadło, Sławomir
dc.date.accessioned2021-10-27T10:55:33Z
dc.date.available2021-10-27T10:55:33Z
dc.date.issued2021
dc.identifier.citationMaterials. 2021, vol. 14, issue 16, art. no. 4389.cs
dc.identifier.issn1996-1944
dc.identifier.urihttp://hdl.handle.net/10084/145359
dc.description.abstractThis paper presents an investigation of abrasive waterjet turning (AWJT). The purpose of the article was to investigate significant parameters of the turning process and to evaluate their impact on the turning product. The influence of the traverse speed, the rotational speed, and the relative position of the jet to the specimen (lateral jet shift) were investigated. Based on the previous research done in this field, the multi-pass tangential turning method was selected. Rotational speed does not seem to have a significant impact on the AWJ turning process. However, the relative position of the jet is a key parameter for improving the efficiency of the process. Increasing the lateral jet shift causes the volume of the material removed to increase until the optimal impact angle is reached. These findings need to be extended in order to adjust AWJT. Without these improvements, a comparison of jet to traditional technologies is inappropriate.cs
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofseriesMaterialscs
dc.relation.urihttps://doi.org/10.3390/ma14164389cs
dc.rights© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectabrasive water jetcs
dc.subjectturningcs
dc.subjectimpact anglecs
dc.subjecttraverse speedcs
dc.subjectrotational speedcs
dc.titleInvestigation of significant parameters during abrasive waterjet turningcs
dc.typearticlecs
dc.identifier.doi10.3390/ma14164389
dc.rights.accessopenAccesscs
dc.type.versionpublishedVersioncs
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume14cs
dc.description.issue16cs
dc.description.firstpageart. no. 4389cs
dc.identifier.wos000689595400001


Soubory tohoto záznamu

Název:
1996-1944-2021v14i16an4389.pdf
Velikost:
4.214Mb
Formát:
PDF
Zobrazit/otevřít

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je © 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.