Zobrazit minimální záznam

dc.contributor.authorEdelmannová, Miroslava
dc.contributor.authorBallari, María de los Milagros
dc.contributor.authorPřibyl, Michal
dc.contributor.authorKočí, Kamila
dc.date.accessioned2021-11-09T10:18:42Z
dc.date.available2021-11-09T10:18:42Z
dc.date.issued2021
dc.identifier.citationEnergy Conversion and Management. 2021, vol. 245, art. no. 114582.cs
dc.identifier.issn0196-8904
dc.identifier.issn1879-2227
dc.identifier.urihttp://hdl.handle.net/10084/145663
dc.description.abstractHydrogen, generally perceived as an environmentally friendly fuel, possesses the potential to lower society's dependency on fossil energy sources whose utilization leads inherently to global warming problems. Its photocatalytic generation from aqueous solutions is a promising green technology competitive to traditionally employed methods such as steam reforming or water electrolysis. However, the limiting yet achievable efficiencies of this process remain unclear. To address the question of process efficiencies, we formulate a phenomenological model predicting the behavior of an experimental photocatalytic reactor. The model considers the polynomial light intensity distribution, the concentration of photocatalysts, and the finite rate of the mass transfer between liquid and gas phases. We validate the model against experimental data obtained from a study with a commercially available TiO2 P25 photocatalyst used as a gold standard in photocatalysis. The theoretical analysis shows that the mass transfer of hydrogen from the liquid to gas phase significantly affects the photoreactor dynamics. Initial accumulation of hydrogen in the liquid phase and its delayed transport to the gas phase result in a nonlinear time-dependence of the hydrogen concentration in the gas phase. The theoretical average reaction rate reaches a maximum for a photocatalyst concentration of 0.23 g/L, which is in good agreement with an experimentally obtained value of 0.25 g/L. The photonic efficiency, defined as a ratio of the average reaction rate to the average light intensity, also reaches a maximum at the same catalyst concentration and interestingly remains constant for any higher TiO2 loads. Finding the optimal photocatalyst concentration and identifying the critical role of mass transfer shall aid further research in developing and optimizing photocatalytic reactors for hydrogen production in the future.cs
dc.language.isoencs
dc.publisherElseviercs
dc.relation.ispartofseriesEnergy Conversion and Managementcs
dc.relation.urihttps://doi.org/10.1016/j.enconman.2021.114582cs
dc.rights© 2021 Elsevier Ltd. All rights reserved.cs
dc.subjectphotocatalysiscs
dc.subjecthydrogen generationcs
dc.subjecttitanium dioxidecs
dc.subjectmathematical modellingcs
dc.subjectLED irradiationcs
dc.titleExperimental and modelling studies on the photocatalytic generation of hydrogen during water-splitting over a commercial TiO2 photocatalyst P25cs
dc.typearticlecs
dc.identifier.doi10.1016/j.enconman.2021.114582
dc.type.statusPeer-reviewedcs
dc.description.sourceWeb of Sciencecs
dc.description.volume245cs
dc.description.firstpageart. no. 114582cs
dc.identifier.wos000693426900007


Soubory tohoto záznamu

SouboryVelikostFormátZobrazit

K tomuto záznamu nejsou připojeny žádné soubory.

Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam