| dc.contributor.author | Václavík, Vojtěch | |
| dc.contributor.author | Dvorský, Tomáš | |
| dc.contributor.author | Dirner, Vojtech | |
| dc.contributor.author | Daxner, Jaromír | |
| dc.contributor.author | Šťastný, Martin | |
| dc.date.accessioned | 2012-11-12T09:45:46Z | |
| dc.date.available | 2012-11-12T09:45:46Z | |
| dc.date.issued | 2012 | |
| dc.identifier.citation | Tehnički vjesnik – Technical Gazette. 2012, vol. 19, no. 3, p. 665-672. | cs |
| dc.identifier.issn | 1330-3651 | |
| dc.identifier.uri | http://hdl.handle.net/10084/95700 | |
| dc.description.abstract | The contribution describes the use of polyurethane foam after the end of its life cycle as an aggregate both for thermal insulating mortars for various wall
surfaces and for lightweight concrete. The structure and the physical and mechanical properties of thermal insulating mortar are described here. The
verification of application of thermal insulating polyurethane mortar in the thickness of 50 ÷ 70 mm to a reference building, where external walls were
insulated, is provided further. The second important area dealt with in this contribution is that of lightweight concrete, for which polyurethane foam of
grain size of 0,125 ÷ 6 mm is used as an aggregate. The physical and mechanical properties of polyurethane concrete of various densities and an example
of its prefabrication are presented. | cs |
| dc.format.extent | 3756986 bytes | cs |
| dc.format.mimetype | application/pdf | cs |
| dc.language.iso | en | cs |
| dc.publisher | Sveučilište J.J. Strossmayera u Osijeku. Strojarski fakultet | cs |
| dc.relation.ispartofseries | Tehnički vjesnik – Technical Gazette | cs |
| dc.relation.uri | http://hrcak.srce.hr/file/129106 | cs |
| dc.subject | aggregate | cs |
| dc.subject | lightweight concrete | cs |
| dc.subject | mechanical properties | cs |
| dc.subject | physical properties | cs |
| dc.subject | polyurethane foam | cs |
| dc.subject | thermal insulating mortar | cs |
| dc.subject | agregat | cs |
| dc.subject | fizikalna svojstva | cs |
| dc.subject | laki beton | cs |
| dc.subject | mehanička svojstva | cs |
| dc.subject | poliuretanska pjena | cs |
| dc.subject | toplinsko izolacijska žbuka | cs |
| dc.title | Polyurethane foam as aggregate for thermal insulating mortars and lightweight concrete | cs |
| dc.title.alternative | Poliuretanska pjena kao agregat za toplinske izolacijske žbuke i laki beton | cs |
| dc.type | article | cs |
| dc.identifier.location | Není ve fondu ÚK | cs |
| dc.description.abstract-en | Prilog opisuje uporabu poliuretanske pjene nakon završetka njezinog životnog ciklusa kao agregata i za toplinske izolacije žbuke za različite zidne površine i za
laki beton. Ovdje su opisane struktura i fizikalno-mehanička svojstva toplinske izolacijske žbuke. Nadalje se daje provjera primjene toplinske izolacijske
poliuretanske žbuke u debljini 50 do 70 mm na referentnoj zgradi, kod koje su vanjski zidovi izolirani. Drugo važno područje kojim se bavi ovaj prilog je da se
poliuretanska pjena veličine zrna od 0,125 do 6 mm koristi kao agregat kod lakog betona. Prikazana su fizikalna i mehanička svojstava betona od poliuretana
različitih gustoća i primjer njegove prerade. | cs |
| dc.rights.access | openAccess | |
| dc.type.version | publishedVersion | cs |
| dc.type.status | Peer-reviewed | cs |
| dc.description.source | Web of Science | cs |
| dc.description.volume | 19 | cs |
| dc.description.issue | 3 | cs |
| dc.description.lastpage | 672 | cs |
| dc.description.firstpage | 665 | cs |
| dc.identifier.wos | 000309164400029 | |