SEM analysis of AISI 316l SS surfaces after magnetoelectrochemical polishing Mep treatment in a transpassive region of polarisation characteristics
| dc.contributor.author | Rokosz, Krzysztof | |
| dc.contributor.author | Hryniewicz, Tadeusz | |
| dc.contributor.author | Malorny, Winfried | |
| dc.contributor.author | Valíček, Jan | |
| dc.contributor.author | Čepová, Lenka | |
| dc.date.accessioned | 2010-12-15T05:31:17Z | |
| dc.date.available | 2010-12-15T05:31:17Z | |
| dc.date.issued | 2010 | |
| dc.description.abstract | The aim of the paper was to carry out the SEM analysis of the Type AISI 316L stainless steel after electropolishing in comparison with the steel surface after magnetoelectropolishing operation. The electrochemical polishing of the AISI 316L SS samples was performed in a transpassive region of polarisation characteristics with the use of a magnetic field induced by a permanent magnet under varying induction (starting from B = 0). Following the assumed study method, the effect of magnetoelectropolishing operation on the surface finish was found. The analyses of the SEM and EDX results of AISI 316L samples after MEP obtained in this work show that the magnetic field considerably affects the surface structure and the surface appearance. The studies carried out on AISI 316L SS after MEP under varying conditions allowed to revealing the possible optimal surface. | en |
| dc.description.abstract-en | Cílem práce bylo provést analýzu SEM AISI 316L nerez oceli po elektroleštění ve srovnání s ocelovým povrchem po magnetoelektrolešticí operaci. Elektrochemické leštění vzorků AISI 316L SS byla provedena v pasivní oblasti polarizačních charakteristik s využitím magnetického pole vyvolané permanentními magnety různých indukcí (od B = 0). Podle předpokladu, byl zjištěn účinek magnetoelektrického leštění na povrchu. Analýzy SEM a EDX výsledků AISI 316L vzorků po MEP získané v této práci ukazují, že magnetické pole značně ovlivňuje strukturu a vzhled povrchu. Studie prováděné na AISI 316L SS po MEP za různých podmínek odhalila možnosti optimálního povrchu. | en |
| dc.format.extent | 2151885 bytes | |
| dc.format.mimetype | application/pdf | |
| dc.identifier.citation | Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. 2010, roč. 56, č. 1, s. 301-308 : il. | en |
| dc.identifier.issn | 1210-0471 | en |
| dc.identifier.uri | http://hdl.handle.net/10084/83512 | |
| dc.language.iso | en | en |
| dc.publisher | Vysoká škola báňská - Technická univerzita Ostrava | en |
| dc.relation.ispartofseries | Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní | en |
| dc.relation.uri | http://transactions.fs.vsb.cz/2010-1/1769.pdf | |
| dc.rights | © Vysoká škola báňská - Technická univerzita Ostrava | |
| dc.rights.access | openAccess | |
| dc.title | SEM analysis of AISI 316l SS surfaces after magnetoelectrochemical polishing Mep treatment in a transpassive region of polarisation characteristics | en |
| dc.title.alternative | SEM analýza AISI 316l SS povrchů po magnetoelektorchemickém leštění MEP ošetření v pasivní oblasti polarizačních vlastností | en |
| dc.type | article | en |
| dc.type.status | Peer-reviewed | |
| dc.type.version | publishedVersion |