A choice of the optimum cutting ranges for cutting nozzles a-sd for selection of metallurgical material.
| dc.contributor.author | Stančeková, Dana | |
| dc.contributor.author | Rudawska, Anna | |
| dc.contributor.author | Kulla, Albert | |
| dc.contributor.author | Petrů, Jana | |
| dc.contributor.author | Holubják, Jozef | |
| dc.date.accessioned | 2019-01-07T13:03:25Z | |
| dc.date.available | 2019-01-07T13:03:25Z | |
| dc.date.issued | 2018 | |
| dc.description.abstract | On the market there are plenty of machines for cutting of steel via a mixture of oxygen and flammable gases. Various manufacturers provide several types of torches, cutting nozzles and other equipment in their product range. Cutting nozzles are a component that significantly affects quality of cutting based in set parameters. However, data from catalogues and manuals by manufacturers on cutting parameters of nozzles are rarely in use in real conditions. That is why optimum cutting conditions for cutting via nozzles A-SD made by RHONA were tested and the final results were compared with those in the catalogue for a proper use in practice. | cs |
| dc.description.firstpage | 106 | cs |
| dc.description.issue | 3 | cs |
| dc.description.lastpage | 113 | cs |
| dc.description.source | Web of Science | cs |
| dc.description.volume | 12 | cs |
| dc.format.extent | 1307941 bytes | |
| dc.format.mimetype | application/pdf | |
| dc.identifier.citation | Advances in Science and Technology Research Journal. 2018, vol. 12, issue 3, p. 106-113. | cs |
| dc.identifier.doi | 10.12913/22998624/92095 | |
| dc.identifier.issn | 2299-8624 | |
| dc.identifier.uri | http://hdl.handle.net/10084/133486 | |
| dc.identifier.wos | 000451866500013 | |
| dc.language.iso | en | cs |
| dc.publisher | Lublin University of Technology | cs |
| dc.relation.ispartofseries | Advances in Science and Technology Research Journal | cs |
| dc.relation.uri | http://doi.org/10.12913/22998624/92095 | cs |
| dc.rights.access | openAccess | cs |
| dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | cs |
| dc.subject | cutting nozzles | cs |
| dc.subject | data from catalogues | cs |
| dc.subject | cutting parameters | cs |
| dc.subject | final results | cs |
| dc.title | A choice of the optimum cutting ranges for cutting nozzles a-sd for selection of metallurgical material. | cs |
| dc.type | article | cs |
| dc.type.status | Peer-reviewed | cs |
| dc.type.version | publishedVersion | cs |