dc.contributor.author | Gemzický, E. | |
dc.date.accessioned | 2011-02-03T09:35:35Z | |
dc.date.available | 2011-02-03T09:35:35Z | |
dc.date.issued | 2007 | |
dc.identifier.citation | Advances in electrical and electronic engineering. 2007, vol. 6, no. 1, p. 40-43. | en |
dc.identifier.issn | 1336-1376 | |
dc.identifier.uri | http://hdl.handle.net/10084/83863 | |
dc.description.abstract | The performance of a radar receiver is greatly dependent on the presence of noise. The receiver should achieve
the constant false alarm rate (CFAR) and the maximum probability of the target detection. The CFAR receivers are usually
used in radar applications for the radar signal processing in case of unknown or time-varying background noise statistics,
especially in cases when clutter or jamming signals are above the receiver threshold. CFAR automatically adjusts the
threshold to prevent the threshold crossings. The paper deals with a software-based implementation of CFAR. The softwarebased
CFAR processing was tested on various types of processors and processing times were compared. The best results
were achieved using the dual-core AMD Athlon64 X2 4800+ using SSE2 instructions for processing. | en |
dc.format.extent | 460459 bytes | cs |
dc.format.mimetype | application/pdf | cs |
dc.language.iso | en | en |
dc.publisher | Žilinská univerzita v Žiline. Elektrotechnická fakulta | en |
dc.relation.ispartofseries | Advances in electrical and electronic engineering | en |
dc.relation.uri | http://advances.utc.sk/index.php/AEEE | en |
dc.rights | Creative Commons Attribution 3.0 Unported (CC BY 3.0) | |
dc.rights | © Žilinská univerzita v Žiline. Elektrotechnická fakulta | |
dc.rights.uri | http://creativecommons.org/licenses/by/3.0/ | |
dc.title | The software-based implementation of the CFAR reciever for the processing of the radar signal | en |
dc.type | article | en |
dc.rights.access | openAccess | |
dc.type.version | publishedVersion | cs |
dc.type.status | Peer-reviewed | cs |