Estimating the uncertainty of measurements for various methods and 3D printed parts
| dc.contributor.author | Kozior, Tomasz | |
| dc.contributor.author | Bochnia, Jerzy | |
| dc.contributor.author | Bochenek, Aleksandra | |
| dc.contributor.author | Malara, Dominik | |
| dc.contributor.author | Michał Nawotka | |
| dc.contributor.author | Jansa, Jan | |
| dc.contributor.author | Hajnyš, Jiří | |
| dc.contributor.author | Wójtowicz, Adam | |
| dc.contributor.author | Měsíček, Jakub | |
| dc.date.accessioned | 2025-01-08T11:16:58Z | |
| dc.date.available | 2025-01-08T11:16:58Z | |
| dc.date.issued | 2024 | |
| dc.description.abstract | This paper presents the results of a study on the dimensional accuracy analysis of models produced by 3D printing technology—Fused Filament Fabrication (FFF). Geometric measurements were conducted using a dial caliper, a 3D scanner and a coordinate measuring machine. In addition, a statistical analysis of the test results was carried out, considering the division into different numbers of test samples (3, 5, 10, 20, 30). The analysis of the test results made it possible to assess the influence of the measuring tools used and the number of samples tested on the final measurement result, as well as to determine the consequences associated with it. | cs |
| dc.description.firstpage | art. no. 3506 | cs |
| dc.description.issue | 8 | cs |
| dc.description.source | Web of Science | cs |
| dc.description.volume | 14 | cs |
| dc.identifier.citation | Applied Sciences. 2024, vol. 14, issue 8, art. no. 3506. | cs |
| dc.identifier.doi | 10.3390/app14083506 | |
| dc.identifier.issn | 2076-3417 | |
| dc.identifier.uri | http://hdl.handle.net/10084/155461 | |
| dc.identifier.wos | 001210115600001 | |
| dc.language.iso | en | cs |
| dc.publisher | MDPI | cs |
| dc.relation.ispartofseries | Applied Sciences | cs |
| dc.relation.uri | https://doi.org/10.3390/app14083506 | cs |
| dc.rights | © 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license. | cs |
| dc.rights.access | openAccess | cs |
| dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | cs |
| dc.subject | FFF | cs |
| dc.subject | PLA | cs |
| dc.subject | 3D scanning | cs |
| dc.subject | coordinate measuring machine | cs |
| dc.subject | statistical analysis | cs |
| dc.title | Estimating the uncertainty of measurements for various methods and 3D printed parts | cs |
| dc.type | article | cs |
| dc.type.status | Peer-reviewed | cs |
| dc.type.version | publishedVersion | cs |