Microwave-assisted hydrothermal synthesis of pure-phase sodalite (>99 wt.%) in suspension: Methodology design and verification

dc.contributor.authorRouchalová, Kamila
dc.contributor.authorRouchalová, Dana
dc.contributor.authorČablík, Vladimír
dc.contributor.authorMatýsek, Dalibor
dc.date.accessioned2024-09-23T09:06:23Z
dc.date.available2024-09-23T09:06:23Z
dc.date.issued2024
dc.description.abstractDespite numerous studies focused on the hydrothermal (HT) synthesis of fly ash zeolites (FAZs), this method still has many limitations, the main of which is the low yield of zeolites. Hydrothermally synthesized zeolites are typically multiphase and exhibit low purity, which limits their applicability. Pure-phase zeolites have been primarily prepared from filtrates after alkaline mineralization of fly ashes, not directly in suspension. In addition, the published methodologies have not been tested in a wider set of samples, and thus their reproducibility is not confirmed. The aim of the study is to propose a reproducible methodology that overcomes the mentioned limitations. The influence of the Si/Al ratio (1.3:1–1:2), the type and concentration of the activator (2/4 M NaOH/KOH/LiOH), the reagent (30% LiCl), the duration (24–168 h), and the temperature (50–180 °C) of the synthesis phases were studied. The sequence of the synthesis phases was also optimized, depending on the type of heat transfer. The fly ashes were analyzed by wavelength-dispersive X-ray fluorescence (WD XRF), flame atomic absorption spectrometry (F-AAS), and X-ray diffraction (XRD). The energy intensity of the synthesis was reduced through the application of unique microwave digestion technology. Both microwave and combined (microwave and convection) syntheses were conducted. FAZs were identified and quantified by XRD analysis. This study presents a three-stage (TS) hydrothermal synthesis of pure-phase sodalite in suspension. Sodalite (>99 wt.%) was prepared from nine fly ashes under the following conditions: I. microwave phase: 120 °C, 150 min, solid-to-liquid ratio (S/L) 1:5, Si/Al ratio 1:1.5, and 4 M NaOH; II. convection phase: 120 °C, 24 h, S/L 1:40, and the addition of 30 mL of 30% LiCl; and III. crystallization: 70 °C for 24 h. The formation of rhombododecahedral sodalite crystals was confirmed by scanning electron microscope (SEM) images.cs
dc.description.firstpageart. no. 269cs
dc.description.issue1cs
dc.description.sourceWeb of Sciencecs
dc.description.volume17cs
dc.identifier.citationMaterials. 2024, vol. 17, issue 1, art. no. 269.cs
dc.identifier.doi10.3390/ma17010269
dc.identifier.issn1996-1944
dc.identifier.urihttp://hdl.handle.net/10084/154907
dc.identifier.wos001141400500001
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofseriesMaterialscs
dc.relation.urihttps://doi.org/10.3390/ma17010269cs
dc.rights© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.cs
dc.rights.accessopenAccesscs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectcoal fly ashcs
dc.subjectzeolitecs
dc.subjecthydrothermal synthesiscs
dc.subjectmicrowave irradiationcs
dc.subjectsingle phasecs
dc.subjectsodalitecs
dc.subjectXRDcs
dc.titleMicrowave-assisted hydrothermal synthesis of pure-phase sodalite (>99 wt.%) in suspension: Methodology design and verificationcs
dc.typearticlecs
dc.type.statusPeer-reviewedcs
dc.type.versionpublishedVersioncs

Files

Original bundle

Now showing 1 - 1 out of 1 results
Loading...
Thumbnail Image
Name:
1996-1944-2024v17i1an269.pdf
Size:
32.09 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 out of 1 results
Loading...
Thumbnail Image
Name:
license.txt
Size:
718 B
Format:
Item-specific license agreed upon to submission
Description: