Internal friction and flowability of clay powder depend on particle moisture, size and normal stress

Abstract

This work investigates the impact of changes in the moisture content of bulk materials. The regularity of moisture change in bulk materials was evaluated for three different particle size classes of clay powders. The research measures the angle of internal friction and flowability under four different normal loads, reflecting the varying pressures during bulk material storage. The influence of moisture change in bulk materials was most pronounced for the smallest particle size fraction, where even a very small moisture change in the order of tenths of a percent steeply affected flowability due to internal friction. After increasing the moisture content by a few percent, a steady state of flow occurred. Critical value was determined when water in the bulk material caused liquefaction. For larger particle size fractions, the impact of moisture change was evident only at higher values (12.5%), with no liquefaction occurring even at 30% moisture. The change in normal load, on the other hand, affected particles of larger size fractions, resulting in improved flow properties.