Influence of annealing temperature on degradation efficiency and iron oxide transformations in CeO2/Fe-oxide sorbents

Abstract

The microstructural and physical properties of magnetically separable CeO2 (5 wt.%)/Fe-oxide sorbents, applicable for the decomposition of organophosphorus pesticides, are analyzed in dependence on calcination temperature. The sorbents are prepared using a two-step procedure: (1) synthesis of magnetite core from cheap and commercially available raw materials; and (2) the formation of cerium (III) carbonate by precipitation with the ammonium hydrogen carbonate, containing re-dispersed magnetite. The cerous carbonate/magnetite precursor is annealed in a muffle furnace at temperatures ranging from 473 to 1073 K for 2 h to obtain the CeO2/Fe-oxide reactive sorbents. Structural characterization of the samples is performed using X-ray diffraction, scanning electron microscopy, Raman and Fourier transform infrared spectroscopy. Magnetic properties are obtained from hysteresis loops, field-cooled and zero-field-cooled curves, first-order reversal curve (FORC) diagrams, and Henkel plots. Sorbents exhibit an increase in coercivity from 0.2 kA/m to about 20 kA/m and a decrease in saturation magnetization from roughly 50 Am-2/kg to 1 Am-2/kg after annealing at 973 K. This deterioration of magnetic properties is caused by the transformation of magnetite and maghemite into weakly ferromagnetic hematite, with a typical peak in FORC diagram and a Morin transition at about 200 K. The degradation efficiency towards parathion and paraoxon methyl is about 30% for samples annealed from 473 K to 773 K.